Abstract:Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

Effective Way of Reducing Coupling Loss Between Rectangular Microwaveguide and Fiber.

An Effective Way of Reducing Coupling Loss between Rectangular Laser and Conventional Fiber

Reducing Insertion Loss of Photonic Crystal Couplers by Suppressing the Remained Power

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Extremely High-Efficiency Coupling Method for Hollow-Core Photonic Crystal Fiber

Low-Loss Coupling Between Tapered Fibers and Anti-Resonant Hollow-Core Photonic Crystal Fibers

Coupling and Fusion Splicing of Photonic Crystal Fibers with Conventional Fibers

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

The Effect Of Pcf Combiners On The Whole Loss Under Different Lengths Of Transition Zone

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Low-Loss Fusion Splicing Photonic Crystal Fibers and Double Cladding Fibers by Controlled Hole Collapse and Tapering

Photonic Crystal Waveguide Directional Coupler Based on Adiabatic Coupling

Efficient Coupling from Dielectric Rib Waveguide to Two-Dimensional Photonic Crystal Waveguide

Low Loss Splicing Experiment of High Nonlinearity Photonic Crystal Fiber and Single Mode Fiber

Simulating the Effects of Refractive Index Difference on the Coupling Efficiency of Periodically Segmented Waveguide Mode Converter

Low-loss Coupling from Single-Mode Solid-Core Fibers to Anti-Resonant Hollow-Core Fibers by Fiber Tapering Technique

Improved Optical Coupling Based on a Concave Cavity Lens Fabricated by Optical Fiber Facet Etching

Double-end low-loss coupling of anti-resonant hollow-core fibers with solid-core single-mode fibers by tapering technique

Research on Coupler of Single Mode Fiber with Photonic Crystal Fiber

Low Loss Fusion Splicing Polarization-Maintaining Photonic Crystal Fiber and Conventional Polarization-Maintaining Fiber