Abstract:Solar cells built with arrays of semiconductor wires have been studied for several years. They present some potential advantages over their bulk counterparts, such as (much) less use of semiconductor material, as well as improved light absorption properties. Most wire-based solar cells are fabricated with arrays of semiconductor p–n junctions, either radial or axial. Here, using a newly developed random connection process based on nickel silicide nanowires, we have built Schottky-type solar cells on interdigitated base and emitter coplanar electrodes that reach an efficiency of 6.5% when only 64% of the footprint area of the device is covered with p-type Si wire light-absorbers. To the best of our knowledge, this is the best efficiency reported so far for a Schottky-type wire-based solar cell; a simple extrapolation of the surface area suggests that an efficiency of more than 10% can be reached, which is comparable to that of single-junction hydrogenated amorphous Si cells. We also compare the Schottky-type cell with a "control" p–i–n one using the same device layout and the same nickel silicide nanowire random connection process: the efficiency of the p–i–n cell is higher (∼8%) but this is due to a higher VOC, the short-circuit current density (ISC) being very similar in both cases, close to 20 mA/cm2. The maximum temperature reached throughout the fabrication process of the cells (whether Schottky-type or p–i–n) is 550 °C, corresponding to the growth of the crystalline Si wires. Altogether, the results presented here hold promises toward cheap photovoltaics based on the use of randomly organized and randomly connected Si wire arrays.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10127?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10127</a>.SEM pictures of Si wires and completed cells with the Ni3Si2 contacts; detailed determination of the footprint of the cells; energy band diagram of the Schottky cell; determination of ideality factors and series resistance; coplanar p–i–n solar cell; (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10127/suppl_file/am0c10127_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Schottky Solar Cells Based On Graphene Nanoribbon/Multiple Silicon Nanowires Junctions

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Monolayer Graphene Film/Silicon Nanowire Array Schottky Junction Solar Cells

Graphene/Silicon Nanowire Schottky Junction for Enhanced Light Harvesting

Schottky Solar Cells Based On Graphene And Silicon

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Graphene-On-Silicon Schottky Junction Solar Cells

High-performance single CdS nanowire (nanobelt) Schottky junction solar cells with Au/graphene Schottky electrodes.

Improved Nanocrystal Formation, Quantum Confinement and Carrier Transport Properties of Doped Si Quantum Dot Superlattices for Third Generation Photovoltaics

Modeling and Simulation of Graphene-Gated Graphene-Gaas Schottky Junction Field-Effect Solar Cell for Its Performance Enhancement

Graphene Based Schottky Junction Solar Cells On Patterned Silicon-Pillar-Array Substrate

New Schottky-Type Wire-Based Solar Cell with NiSi x Nanowire Contacts

Investigation of graphene-based Schottky junction solar cell with heavy-doped silicon

Amorphous silicon core-shell nanowire Schottky solar cells

Interface engineering for graphene nanowalls/silicon Schottky solar cells prepared by polymer-free transfer method

Graphene-based Schottky junction solar cells

Design and Photovoltaic Properties of Graphene/Silicon Solar Cell

Core-Shell Heterojunction of Silicon Nanowire Arrays and Carbon Quantum Dots for Photovoltaic Devices and Self-Driven Photodetectors

Heterojunction Photovoltaic Devices Utilizing Single Wall Carbon Nanotube Thin Films and Silicon Substrates

Carbon nanotube and CdSe nanobelt Schottky junction solar cells.

Developed Graphene/Si Schottky Junction Solar Cells Based on the Top-Window Structure