Abstract:A three-dimensional fluid model is developed to investigate the radio-frequency inductively coupled H2 plasma in a reactor with a rectangular expansion chamber and a cylindrical driver chamber, for neutral beam injection system in CFETR. In this model, the electron effective collision frequency and the ion mobility at high E-fields are employed, for accurate simulation of discharges at low pressures (0.3 Pa–2 Pa) and high powers (40 kW–100 kW). The results indicate that when the high E-field ion mobility is taken into account, the electron density is about four times higher than the value in the low E-field case. In addition, the influences of the magnetic field, pressure and power on the electron density and electron temperature are demonstrated. It is found that the electron density and electron temperature in the xz-plane along permanent magnet side become much more asymmetric when magnetic field enhances. However, the plasma parameters in the yz-plane without permanent magnet side are symmetric no matter the magnetic field is applied or not. Besides, the maximum of the electron density first increases and then decreases with magnetic field, while the electron temperature at the bottom of the expansion region first decreases and then almost keeps constant. As the pressure increases from 0.3 Pa to 2 Pa, the electron density becomes higher, with the maximum moving upwards to the driver region, and the symmetry of the electron temperature in the xz-plane becomes much better. As power increases, the electron density rises, whereas the spatial distribution is similar. It can be summarized that the magnetic field and gas pressure have great influence on the symmetry of the plasma parameters, while the power only has little effect.

The Three-Dimensional Numerical Simulation Study of H Transmission and Negative Hydrogen Ions Production

Numerical simulation studies on negative hydrogen ion source for uniformity of H - ion beam

A three-dimensional particle-in-cell/Monte Carlo computer simulation based on negative hydrogen ion source

Numerical Simulation Research of Plasma Characteristics in a Multi-Cusp Proton Source Based on Magnets Layout

The MCC numerical algorithm of the extraction of the surface-produced negative hydrogen ions

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

3D Simulation of the Electron Energy Distribution in Negative Hydrogen Ion Source

3D Fluid Model Analysis on the Generation of Negative Hydrogen Ions for Negative Ion Source of NBI

Influence of surface work function and neutral gas temperature on mechanism of H− production in negative hydrogen ion sources

Numerical Investigation of Radio-Frequency Negative Hydrogen Ion Sources by a Three-Dimensional Fluid Model*

Enhancing ion extraction with inverse sheath in negative hydrogen ion sources for NBI heating

The Full Three-Dimensional Electromagnetic Pic/Mcc Numerical Algorithm Research of Penning Ion Source Discharge

Enhancing Ion Extraction with an Inverse Sheath in Negative Hydrogen Ion Sources for NBI Heating

A Preliminary Study of A Negative Hydrogen Pig-Type Ion Source for the Compact Cyclotron

A Full Three-Dimensional Numerical Diagnosis of Japan Atomic Energy Agency 10 Ampere Multi-Cusp Negative Hydrogen Ion Source

Gas Flow Influence on Negative Hydrogen Ion Generation Within the Microwave-Driven Negative Ion Source

Two-Dimensional Spatial Distribution And Production Mechanism Of H- Ions In Cylindrical Inductively Coupled H-2 Discharges

Experimental and Simulation Study on the Backstreaming Positive Ions on the Quarter-Size Negative Ion Source for CRAFT NNBI Test Facility

Study on Space Charge Compensation in Negative Hydrogen Ion Beam

Analysis of the Chemical Network in a Volume-Production High-Current Negative Hydrogen Ion Source

Numerical study of the plasma meniscus shape and beam optics in RF negative ion sources