Abstract:In order to improve the automatic working performance of orchard sprayer,in this study,an automatically variable-rate orchard sprayer with 40 nozzles and 8 fans based on LIDAR (Light Detection and Ranging) was developed.The high-precision scanning laser sensor was adopted as the detecting source to detecting the canopy parameter.Electromagnetic valve and brushless fan were adopted as actuators to control the flow rate and air volume based on the pulse width modulation (PWM) signals.Each nozzle in the spray system,coupled with a solenoid,achieved variable rate delivery in real time based on the canopy volume.Each side of the prototype equipped four integrated atomization units with one independent brushless fan.The independent brushless fan located behind of atomization unit,and assisted the droplets sprayed from the five nozzles blowing into the canopy,which is conductive to the local regulation of spraying quantity.The brushless motor has the advantages of fast-response,high-speed,and long working-time.The rotating speed of each brushless motor could be adjusted in real-time by PWM signal according to the canopy parameters of fruit tree.The canopy segmentation model was designed to measure the volume and density of canopy,which could meet 3 m height canopy.The canopy was divided into many canopy units,and each nozzle corresponded with one canopy unit and each brushless fan corresponded with five canopy units.A laptop was used to calculate the volume and density of each canopy unit based on the data scanned by laser sensor and the segmentation model.Then the spraying quantity needed forcanopy unit and the air volume needed for five canopy units were acquired by control system.Next,the PWM signals emitted by single chip microcomputer would be transmitted to the drivers of valves and fans to adjust the flow rate and air flow.A total of 48 channel PWM signals were designed for the whole machine,and each channel would be controlled separately.The gasoline generator was adopted as energy source to realize long-working and fully automatic spraying,and the independent brushless fan was used instead of central fan with PTO (Power Take Off)-power to realize partly air volume and use-dosage according to canopy size.The field experiments were conducted in an apple orchard,a research farm belonging to the China Agricultural University,in Beijing.The main tests included the test of deposition distribution in the canopy and air velocity distribution of different height.The tree row space was 5m×2m,the average height of tree was 4.1 m,and the canopy diameter was 2.6m.The environment temperature was 14℃,the humidity was 50.3％ and the wind speed was 0.7-1.2 m/s.Tartrazine (2.5％o) was chosen as the tracer material and travelspeed was 0.8m/s.Water sensitive paper(2.6 cm×7.5 cm) and metallic screen mesh(2.5 cm×7.5 cm) were adopted to receive the deposition for the test of deposition distribution in the canopy.The artificial targets were arranged in the canopy in eight layers with three directions of right,left and middle in each layer.Also,a metal rod was established at the distance of 1.5m from tree center to fix the anemometers.The lowest anemometer was 1.2 m from the ground and the distance of adjacent anemometer was 0.4m.The results showed that the deposits on the from and back of tree were 1.92 and 1.37 μL/cm2,and the minimum number of droplets was 46.2per cm2,which was greater than the requirement of droplet adhesion rate over 25/cm2 in the application of pest and disease control.The coefficient variation of three depths of tree was 14.2％,18.0％ and 13.7％,respectively.The fitting results of canopy contour with deposition and air velocity distribution showed that the designed prototype could realize variable-rate spraying according to the canopy information,which could meet design requirement.In this study,we proposed a new equipment of plant protection for fusiform-type fruit tree,and also provided reference for design and performance optimization for plant protection machinery.

Research on the Accuracy and Applicability of the Measurement Method of Tree Canopy Volume Based on Ultrasonic Sensors

Research on the Influence Factors of Ultrasonic Measurement System of Tree Canopy Volume

Method for Estimating Canopy Thickness Using Ultrasonic Sensor Technology

Estimation of Upper and Lower Canopy Volume Ratio of Fruit Trees Based on M-K Clustering

Examining the Role of UAV Lidar Data in Improving Tree Volume Calculation Accuracy

Research on volume prediction of single tree canopy based on three-dimensional (3D) LiDAR and clustering segmentation

Research Progress on Variable-Rate Spraying Technology in Orchards

CMPC: An Innovative Lidar-Based Method to Estimate Tree Canopy Meshing-Profile Volumes for Orchard Target-Oriented Spray

Design and Development of Variable Rate Spraying System Based on Canopy Volume Measurement

3-D Reconstruction and Measurement of Greenhouse Strawberry Canopy Based on Ultrasonic Sensors

Tree Canopy Volume Extraction Fusing ALS and TLS Based on Improved PointNeXt

Canopy Parameter Estimation of Citrus grandis var. Longanyou Based on LiDAR 3D Point Clouds

Design and Experiment of Automatic Profiling Orchard Sprayer Based on Variable Air Volume and Flow Rate.

Error Analysis of Measuring the Diameter, Tree Height, and Volume of Standing Tree Using Electronic Theodolite

Calibrating ultrasonic sensor measurements of crop canopy heights: a case study of maize and wheat

Canopy Parameter Estimation of <i>Citrus grandis</i> var. <i>Longanyou</i> Based on LiDAR 3D Point Clouds

Study and Experiment on the Effect of Fruit Trees’ Volume by Different Travel Direction and LiDAR Installation Height

Canopy Volume Measurement of Fruit Trees Using Robotic Platform Loaded LiDAR Data

Canopy Volume Extraction of Citrus reticulate Blanco cv. Shatangju Trees Using UAV Image-Based Point Cloud Deep Learning

Effects of Different Ground Segmentation Methods on the Accuracy of UAV-based Canopy Volume Measurements