Abstract:We have reported recently a multiplexed fiber Bragg grating (FBG) strain sensor by using the technique of synthesis of optical coherence function. By modulating the optical frequency of the light source in a sinusoidal waveform, the coherence function is synthesized into a series of periodical peaks in the meaning of time- integration. Using one of the coherence peaks as a measurement window, and sweeping it along a string of FBGs by adjusting the repetitive frequency of the sinusoidal modulation waveform, we can selectively pick up the reflection as interference signal from any one FBG from the string. Therefore, the FBGs are resolved spatially; they are not necessarily different to each other in Bragg wavelength. By sweeping the center frequency of the light source in a sawtooth waveform, the shape of the FBG reflection spectrum can be obtained, and thus the amount of the strain applied to the FBG can be estimated. Up to date, 100-Hz interrogation speed was achieved with this method, and the measurement range is limited to within the coherence length of the light source. In this presentation, novel methods are proposed to enhance the interrogation speed and the measurement range further. The performance-limiting factors on the interrogation speed and the measurement range are evaluated. It is found that the detected interference signal appears at a certain frequency shifted from the heterodyne beat due to the sweeping of the center frequency. By observing at the shifted frequency, 1-kHz interrogation speed and measurement range beyond coherence length of the light source are achieved.

Dynamic and static strain gauge using superimposed fiber Bragg gratings

Additive Non-Uniform Random Sampling in Superimposed Fiber Bragg Grating Strain Gauge

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

A New FBG Based Dynamic-Strain Interrogation System

Dynamic Fiber Bragg Grating Sensing Method

High-speed Quasi-Distributed Strain Sensing Based on Time Division Multiplexing of Fibre Bragg Gratings

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Study on Strain Measurement Using Dynamic Demodulation Technique with Two Fiber Gratings

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

A fiber Bragg grating interrogating dynamic strains sensor system based on interference of polarized mode

High Resolution Static Strain Measurement Using An In-Fibre-Bragg-Grating-Based Fabry-Perot Sensor

An Ultrahigh Resolution FBG Dynamic Strain Sensing System with Eigenvector Spectrum Analysis Method

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

Simultaneous measurement of temperature and strain using double-cladding fiber based hybrid Bragg grating

An Ultra-High-Resolution Fbg Static-Strain Sensor for Geophysics Applications

Fiber Bragg Grating Dynamic Demodulation Based on Non-Equilibrium Interferometry

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

High-speed Interrogation of Multiplexed Fiber Bragg Grating Sensors with Similar Bragg Wavelength by Synthesis of Optical Coherence Function

Simultaneous Static Strain, Temperature and Vibration Measurement Using an Integrated FBG/EFPI Sensor

Simultaneous Strain, Temperature and Vibration Measurement Using a Multiplexed In-Fibre-bragg-grating/fibre-fabry-perot Sensor System

Multiplexed Static FBG Strain Sensors by Dual-Comb Spectroscopy with a Free Running Fiber Laser