Abstract:<p>Accuracy problem is one of the most challenging issues for the application of parallel robots in manufacturing industry, and kinematic calibration is a feasible approach to solve it. Although lots of researches have brought up a diversity of calibration methods, there are still rooms for the improvement of the accuracy, efficiency and robustness of these calibration effects. In this paper, an improved method for kinematic calibration of a 5-axis parallel machining robot is proposed, which includes a new forward kinematic solution (FKS) based on dual quaternion and a modified error modeling process leading to dimensionless error mapping matrixes (EMMs). On this basis, an iterative identification procedure is schemed, and the kinematics and identification simulations are carried out. The kinematics simulation results show that the proposed FKS has wider convergence range and faster computation speed than <em>Levenberg-Marquardt</em> algorithm, while the identification simulation results show that the residual pose errors with the proposed dimensionless EMMs are lower than that with the conventional EMM in various units. Additionally, the procedure of the full pose measurement with a laser tracker and an auxiliary tool is introduced, and thereby the contrast experiments of kinematic calibration on the prototype are conducted. The experiment results indicate that the residual position and orientation errors based on the dimensionless EMM decrease by 97.67% and 86.85% of the original values, respectively, at least, and by 76.77% and 38.65% of that based on the conventional EMM, respectively, at most. Consequently, it is further confirmed that the proposed calibration method is effective in enhancing the identification accuracy of the geometric errors and improving the positioning accuracy of the studied parallel robot.</p>

Self-calibration of a Class of Parallel Kinematic Machines with Redundant Kinematic Chain

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

A United Kinematic Calibration Method for a Dual-Machine System

Step-by-step Self-Calibration of a 3-DOF Planar Parallel Kinematic Machine Tool with Actuation Redundancy

Improving Tracking Accuracy of a Novel 3-DOF Redundant Planar Parallel Kinematic Machine

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

PARAMETRIC IDENTIFICATION OF PARALLEL MANIPULATOR WITH REDUNDANCY DRIVEN BY PNEUMATIC MUSCLES

Control of a 4-DOF Parallel Kinematic Machine with Actuation Redundancy

Kinematic Parameter Calibration for Parallel Robot Based on Robust Estimation and PCR Algorithm

Kinematical calibration of a hybrid machine tool with Regularization method

Self-calibration of a 6-DOF Redundantly Actuated Parallel Mechanism

Kinematic error modeling and identification of the over-constrained parallel kinematic machine

CALIBRATION EXPERIMENT RESEARCH OF PARALLEL KINEMATICS MACHINE WITH A FEW DEGREES

Kinematic Calibration of a 4PPa-2PaR Parallel Mechanism With Subchains on Limbs

Kinematic calibration of a 5-axis parallel machining robot based on dimensionless error mapping matrix

Kinematic Calibration Of Parallel Robots Using Pose Measurement Obtained With Coordinate Measuring Machine

A general and novel approach for parameter identification of 6-DOF parallel kinematic machines

Kinematic Calibration Method with High Measurement Efficiency and Robust Identification for Hybrid Machine Tools

Kinematic Calibration Of The 3-Dof Parallel Module Of A 5-Axis Hybrid Milling Machine

Automated Measurement and Hybrid Adaptive Identification Method for Kinematic Calibration of Hybrid Machine Tools