Abstract:Despite of the promising advancements in the last decade, the majority of scanning electron microscope (SEM)-based nanomanipulation tasks remain manually performed. Even in automated tasks, human intervention is required, at least during the task preparatory stage, where both the object of interest and robot end-effector are adequately enclosed in the field of view (FOV) of SEM at moderate magnification. This paper proposes a fully automated visual servo control method for workspace navigation of nanorobot end-effector that actively maintains the end-effector position offset from the center of FOV during passive working scene zooming and translation operations. We also propose using the scaling image Jacobian matrix theory to adaptively establish the hand-eye relationship of the nanorobotic system at uncalibrated magnifications, without the need for hardware regulation. This proposed method for workspace navigation is applicable to almost all commercial nanomanipulation systems. To the authors’ best knowledge, there has been no dedicated research on this problem in the literature. Experiments show that the proposed method significantly improves workspace navigation efficiency by about two-thirds, even for a skilled operator. Note to Practitioners—Workspace navigation refers to the process of moving the FOV to visually enclose the object or feature of interest at a moderate magnification, which is prerequisite for initializing either an automated or manual nanomanipulation task. This process involves consecutive zooming of the SEM in and out, as well as translating the sample stage, which can cause the end-effector to move out of the FOV. Therefore, it is necessary to move the robot end-effector with visual assistance along workspace navigation to avoid unexpected collisions. Typically, skilled operators perform this process manually in almost all nanomanipulation tasks, which is tedious and time-consuming. Therefore, developing an automated visual servo control method for workspace navigation of end-effector will significantly contribute to the nanomanipulation community.

Virtual Force Feedback-Based 3d Master/Slave Tele-Nanomanipulation in Sem

Atomic Force Microscope-Based Nanomanipulation with Drift Compensation

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly

Nanomanipulation Using Atomic Force Microscope with Drift Compensation.

Automated Nanomanipulation with Afm by Using L-1 Adaptive Controller

Visual Servo Control for Workspace Navigation of Nanorobot End-Effector Inside SEM

A Novel Master–Slave Interventional Surgery Robot with Force Feedback and Collaborative Operation

Experimental Use Validation of the Master Hybrid Haptic Device Dedicated to Remote Center-of-Motion Tasks

Recent Advances in Nanorobotic Manipulation Inside Scanning Electron Microscopes

Force-Sensor-Less Bilateral Teleoperation Control of Dissimilar Master-Slave System with Arbitrary Scaling

A Novel Master Manipulator with Force Feedback for Robot-Assisted Natural Orifice Transluminal Endoscopic Surgery

Realization of Force Detection and Feedback Control for Slave Manipulator of Master/Slave Surgical Robot

Enhanced teleoperation performance using hybrid control and virtual fixture

An Integrated 3D MEMS Force Sensing and Feedback System for Robot-Assisted Minimally Invasive Surgery

An Optimized Design of a Large Stroke Beam Flexure-Based Parallel Nano Manipulator

ParaMaster: Design and Experimental Characterizations of a Haptic Device for Surgical Teleoperation

A Novel Haptic Master Manipulator With a Pneumatic-Electric Mechanism for Natural Orifice Transluminal Endoscopic Surgery

Force feedback haptic interface for bilateral teleoperation of robot manipulation

Design and implementation of a 6 DOF delta force feedback controller for tele-operation

Design of a Haptic Master Device for Teleoperation Applications