Abstract:As promising magnet types, discrete-cosine-theta and canted-cosine-theta (DCT&CCT) superconducting magnets are designed for the High Energy Fragment Separator (HFRS), a fragment separator of the High Intensity Heavy Ion Accelerator Facility (HIAF). Quench protection is one of the key issues for DCT&CCT superconducting magnets due to low thermal conductivity between each turns and slow transverse quench propagation. Thermal quench-back induced by the center cooper wire as a heater automatically is a feasible quench protection option for the magnet wound with 6+1 type superconducting cables (six superconducting wires and one center cooper wire). In the present paper, an electro-thermal coupling model is developed and validated to deal with the dynamic coupling behaviors of electrical and temperature fields inside the superconducting magnets during quench protection process. The transient evolutions of current and voltage-to-ground are numerically obtained by finite element method, which shows obvious quench-back behaviors and agree well with the experimental measurements of the prototype magnet L800 in first round test. The hot-spot temperature can be reduced significantly considering quench-back effect. Furthermore, the quench protection baselines of temperature and quench integral are analyzed and predicted for L800, indicating that the magnet can be protected properly by the protection method with a quench-back at ultimate current 466A.

Quench Protection Design of an 8-T Magnet Built With Low- and High-Temperature Superconducting Coils

Quench Protection Study of a 14 T Conduction-Cooled Magnet Built with Nb3Sn and NbTi Superconducting Coils for PPMS

Quench Protection Design of a 1.5 T Superconducting MRI Magnet

A Quench Protection Method for HTS Coils Based on Temperature Rise Forecast

Electro-Thermal Coupling Model of Quench Protection with a Quench-Back for DCT&CCT Superconducting Magnets

Quench Protection Design of a Head-Only 1.5 T MRI Superconducting Magnet

Design of the Circuit in Superconducting Magnet Quench Detection

Quench Protection Design and Simulation of a 7 Tesla Superconducting Magnet

A High-Efficiency Protecting Scheme for HTS Inserts in Case of Background Magnet Quenches

Design and Characteristic Analysis of Active Quench Protection System for Superconducting Magnet

A Quench detection method for closed-loop superconducting coils based on currents redistribution in co-windings

Protection Circuit and Quench Simulation of a 7 T Superconducting Magnet for Animal MRI

Experimental study for the quench protection system of the 9.4-T whole-body MRI superconducting magnet

Quench Detection Utilizing Stray Capacitances

A quench detection method for parallel co-wound HTS coils based on current redistribution

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Numerical and Experimental Study for the Quench Propagation of A Test Superconducting Magnet

Design and Improvement of Quench Protection for A 3 T MRI Superconducting Magnet

Quench Simulation Results for a 12-T Twin-Aperture Dipole Magnet

A new quench detection method for HTS magnets: stray-capacitance change monitoring

Quench Detection Design for HTS SMES