Abstract:A graft-from approach has been performed to achieve covalent functionalization of multi-walled carbon nanotubes (MWNTs) with oligo-hydroxyamide (oHA). Pristine MWNT was first oxidized to MWNT-COOH and then functionalized to MWNT-COCl by acyl chloride. MWNT-COCl was copolymerized with oHA to produce oHA-grafted MWNTs (MWNT-oHA). The thickness of the oHA shell in MWNT-oHA is about 7.5nm. MWNT-oHA has a remarkable solubility in polar solvents and a good thermal stability because characteristic dehydrative ring closure occurs upon heating and forms a thermally more stable benzoxazole component. MWNT-oHA has been further covalently incorporated with a rigid-rod polymer matrix, poly(p-phenylene benzobisoxazole) (PBO), through in situ polymerization. Continuous PBO–MWNT composite fibers with different MWNT compositions have been fabricated using dry-jet wet-spinning technique. The structure and morphology of PBO–MWNT composite fibers have been characterized and their mechanical, thermal, conducting properties have been investigated. The tensile modulus, tensile strength, and thermal stability of PBO–MWNT composite fibers have been improved because of a good dispersion and high alignment of MWNTs in PBO as well as enhanced interfacial interaction between these two components. Furthermore, increased conductivity has been discovered in the PBO–MWNT composite films and the inner core of the composite fibers; however, not on the outer surface. The phenomena can be interpreted using percolation model together with the heterogeneous fiber morphology and nanotube distribution over the cross-section of the fiber.

One-pot preparation and continuous spinning of carbon nanotube/poly(p- phenylene benzobisoxazole) copolymer fibers

Synthesis, Structure and Properties of Carbon Nanotube/Poly(P-Phenylene Benzobisoxazole) Composite Fibres

In Situ Preparation and Continuous Fiber Spinning of Poly(P-Phenylene Benzobisoxazole) Composites with Oligo-Hydroxyamide-Functionalized Multi-Walled Carbon Nanotubes

Mechanical Reinforcement of PBO Fibers by Dicarboxylic Acid Functionalized Carbon Nanotubes Through in Situ Copolymerization

Synthesis of Novel Single-Walled Carbon Nanotubes/poly (P-Phenylene Benzobisoxazole) Nanocomposite

Preparation of Multiwall Carbon Nanotubes/poly(p‐phenylene Benzobisoxazole) Nanocomposites and Analysis of Their Physical Properties

Investigation of the Mechanical Properties of the Modified Poly(p-Phenylene Benzobisoxazole) Fibers Based on 2-(4-Aminophenyl)-1h-benzimidazol-5-amine

SYNTHESIS AND PROPERTIES OF CNTs/PBO COMPOSITES

Synthesis and Properties of PBO/SWNT Composite Fibers

Multi-walled Carbon Nanotubes-Poly (P-Phenylene-2,6-benzoxazole) Nanocomposites Prepared by In-Situ Polymerization Process

Preparation and Properties of PBO/SWNT Composite Fibers

One-pot in Situ Polymerization of Graphene Oxide Nanosheets and Poly(p-Phenylenebenzobisoxazole) with Enhanced Mechanical and Thermal Properties

Study On Synthesis And Dispersion Characteristics Of Mwnts/Pbo Composites Prepared By In-Situ Polymerization

The Preparation and Characterization of Polybenzoxazole Copolymerized with Multiwalled Carbon Nanotube via Direct Friedel-Crafts Acylation

In Situ Polymerization and Characterization of Graphene Oxide‐co‐poly(phenylene Benzobisoxazole) Copolymer Fibers Derived from Composite Inner Salts

Poly(p-phenylenebenzobisoxazole) Nanofiber Layered Composite Films with High Thermomechanical Performance

Poly(2,6-dimethyl-1,4-phenylene Oxide) (PPO) Multi-Bonded Carbon Nanotube (CNT): Preparation and Formation of PPO/CNT Nanocomposites

Study on Synthesis and Dispersion Characteris- Tics of MWNTs/PBO Composites Prepared by In-situ Polymerization

Carbon Nanotubes Grafting Pbo Fiber: A Study on the Interfacial Properties of Epoxy Composites

Aligned Carbon Nanotube/polymer Composite Fibers with Improved Mechanical Strength and Electrical Conductivity

Microstructure and Properties of Multiwalled Carbon Nanotubes/poly (P-Phenylene Benzobisoxazole) Composites