Abstract:Commonly used nanofiber fabrication technologies have many shortcomings: the yield of electrospinning is low, solution blowing spinning (SBS) and its improved technologies have problems with large fiber diameter, non-uniform nanofiber diameter and poor receiving aggregation of nanofibers on receiver. A nanofiber fabrication technology called electrostatic-induction-assisted solution blowing spinning (ESBS), which overcomes these disadvantages, was developed in this paper. This technology utilizes the joint action of electrostatic force and airflow stretching force to stretch the jet to fabricate nanofibers. The grounding of the blunt needle realizes the directional migration and dynamic circulation of charges in the ESBS microscopic system. Compared with traditional SBS, the average diameter and diameter standard deviation of ESBS nanofibers can be reduced by 44 % and 80.8 %, respectively, and the fiber cover rate can be increased by 329.7 %. In contrast to the cylindrical-electrode-assisted solution blowing spinning, the mean diameter and diameter standard deviation of ESBS nanofibers can be reduced by 34.6 % and 68.1 %, respectively, and the fiber cover rate can be increased by 305 %. The microcosmic fabrication mechanism of ESBS nanofibers—"the theory of separation and directional transfer of charges" was proposed and verified. ESBS nanofibers with single-needle injection speed up to 200 μl/min (far exceeding the 4–10 μl/min injection speed of conventional electrospinning) were successfully fabricated to prove that this technology has great industrial potential. ESBS nanofibers with small and uniform diameter, high yield, and good receiving aggregation of fibers on receiver have bright application prospects in many fields.

Fabrication of nanochannels via near-field electrospinning

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Near-field electrospinning for 2D and 3D structuring: Fundamentals, methods, and applications

Electro-spinning/netting: A strategy for the fabrication of three-dimensional polymer nano-fiber/nets

Fabrication of electrostatic-induction-assisted solution blowing spinning nanofibers and its mechanism

A Simple Cost‐Effective Method to Fabricate Single Nanochannels by Embedding Electrospun Polyethylene Oxide Nanofibers

Oriented Nanofibers by a Newly Modified Electrospinning Method

Direct write micro/nano optical fibers by near-field melt electrospinning

2D and 3D Electrospinning of Nanofibrous Structures by Far-Field Jet Writing

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Functional Nanofibers with Multiscale Structure by Electrospinning

Finite element method assisted design of needleless electrospinning systems for mass production of polymer nanofibers

Morphology Control Of Nanohelix By Electrospinning

Patterning and process parameter effects in 3D suspension near-field electrospinning of nanoarrays

Mass production of high-quality nanofibers via constructing pre-Taylor cones with high curvature on needleless electrospinning

Electrospinning Evolution Derived from TRIZ Theory for Directly Writing Patterned Nanofibers

Effective Method for High-Throughput Manufacturing of Ultrafine Fibres Via Needleless Centrifugal Spinning

Fabrication of Nano-Electromechanical Structures Down to 20 nm by Spacer Technology

Fabrication of carbon nanofibers with Si nanoparticle-stuffed cylindrical multi-channels via coaxial electrospinning and their anodic performance

Fabricating Nanostructure Materials by Electrospinning Technique

Mesoporous Nanofibers from Extended Electrospinning Technique