Abstract:A novel sensing material of polyethyleneimine-mediated WO3 nanoparticles was prepared by a simple and efficient one-pot hydrothermal method. The structure and morphology characteristics of the as-prepared WO3 nanoparticles were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The results showed that the as-prepared WO3 nano-materials were composed of highly dispersible WO3 nanoparticles, and these nanoparticles with the particle size in the range of 10-50 nm showed a monoclinic structure. NO2 sensing measurements demonstrated that WO3 nanoparticles-based gas sensor exhibited superior response, outstanding selectivity, excellent reversibility, and good long-term stability. The sensor response increased as NO2 concentration increased. The highest response value of 251.7 was achieved to 5 ppm NO2 at the optimal operating temperature of 100 degrees C. Especially, the sensor response could reach 3.2-50 ppb NO2. It also exhibited fast response and recovery times with a high sensor response even in a high-humidity environment. The excellent gas sensing properties of WO3 nanoparticles could be ascribed to their high effective surface areas as well as numerous oxygen vacancies, which foresee the great potential application for fast and effective detection of sub-ppm level NO2 under different humidity environments. (C) 2018 Elsevier B.V. All rights reserved.

Poly(ionic liquid)-wrapped single-walled carbon nanotubes for sub-ppb detection of CO2.

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

A carbon monoxide sensor based on single-walled carbon nanotubes doped with copper chloride

Polyethyleneimine/polyethylene-glycol/Ti3C2Tx composites for ultrasensitive room-temperature CO2 sensing

Co<sub>3</sub>O<sub>4</sub> Nanosheets Decorated with In<sub>2</sub>O<sub>3 </sub>Nanocubes with Exposed {001} Facets for ppb-Level CO Sensing

Polyethyleneimine-Starch Functionalization of Single-Walled Carbon Nanotubes for Carbon Dioxide Sensing at Room Temperature

Ultrahigh sensitive and selective room-temperature carbon monoxide gas sensor based on polypyrrole/titanium dioxide nanocomposite

PEI-Functionalized Carbon Nanotube Thin Film Sensor for CO2 Gas Detection at Room Temperature

Guanidine Derivative Polymer Coated Microbubble Resonator for High Sensitivity Detection of CO2 Gas Concentration

Differential Detection of NH3 and NO2 by Polymer Non-Covalently Encapsulated Semiconducting Single-Walled Carbon Nanotubes

Co3O4 Nanosheets Decorated with In2O3 Nanocubes with Exposed {001} Facets for Ppb-Level CO Sensing

Differentiation of Gas Molecules Using Flexible and All-Carbon Nanotube Devices

A highly selective chemical gas sensor based on functionalization of multi-walled carbon nanotubes with poly(ethylene glycol)

CO2-Responsive Polymer-Functionalized Au Nanoparticles for CO2 Sensor

Batch Fabrication of Ultrasensitive Carbon Nanotube Hydrogen Sensors with Sub-ppm Detection Limit.

Controllable Synthesis of Co3O4/polyethyleneimine-carbon Nanotubes Nanocomposites for CO and NH3 Gas Sensing at Room Temperature

CuO surface doped In2O3/CeO2 nanofibers for ppb-ppm level carbon monoxide gas detection in low-temperature

Polyethyleneimine–Chromium Oxide Nanocomposite Sensor with Patterned Copper Clad as a Substrate for CO2 Detection

Sub-ppm Level NO2 Sensing Properties of Polyethyleneimine-Mediated WO3 Nanoparticles Synthesized by a One-Pot Hydrothermal Method

Improved Sensing Properties of Thermal Conductivity-Type CO2 Gas Sensors by Loading Multi-Walled Carbon Nanotubes Into Nano-Al2O3 Powders

Nanocomposite of Cobalt Oxide Nanocrystals and Single-Walled Carbon Nanotubes for A Gas Sensor Application