Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

The Inactivation of Resistant Candida Albicans in a Sealed Package by Cold Atmospheric Pressure Plasmas

Bactericidal Effect of Various Non-Thermal Plasma Agents and the Influence of Experimental Conditions in Microbial Inactivation: A Review

Water disinfection by pulsed atmospheric air plasma along water surface

Atmospheric Pressure Cold Plasma As an Antifungal Therapy

Experimental Study on Bacteria Disinfection Using a Pulsed Cold Plasma Jet with Helium/oxygen Mixed Gas

Bactericidal effects of nonthermal low-pressure oxygen plasma on S. typhimurium LT2 attached to fresh produce surfaces

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Inactivation of <Emphasis Type="Italic">Candida</Emphasis> Strains in Planktonic and Biofilm Forms Using a Direct Current, Atmospheric-Pressure Cold Plasma Micro-Jet

Sterilization and Drug Susceptibility Study of Candida Albicans Biofilm on Denture Base Resin Treated by Direct and Alternating Current Atmospheric Pressure Cold Plasma Microjet

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Surface Sterilization By Atmospheric Pressure Non-Thermal Plasma

Characterization of High Voltage Cold Atmospheric Plasma Generation in Sealed Packages as a Function of Container Material and Fill Gas

Rapid Inactivation of Biological Species in the Air Using Atmospheric Pressure Nonthermal Plasma

Inactivation of Candida albicans Biofilms on Polymethyl Methacrylate and Enhancement of the Drug Susceptibility by Cold Ar/O 2 Plasma Jet

Inactivation of Candida Biofilms by Non-Thermal Plasma and Its Enhancement for Fungistatic Effect of Antifungal Drugs

A Novel Approach on Dielectric Barrier Discharge Using Printed Circuit Boards

A novel approach to the pacemaker infection with non-thermal atmospheric pressure plasma

The Interaction of a Direct-Current Cold Atmospheric-Pressure Air Plasma with Bacteria

Degradation of Antibiotic Resistance Contaminants in Wastewater by Atmospheric Cold Plasma: Kinetics and Mechanisms

Treatment of Antifungal Resistant Candida Biofilms And Clinical Dermatosis Using A Direct-Current , Atmospheric-Pressure Cold Plasma Micro-Jet

Sterilization of Bacteria with Low-Pressure Low-Temperature Plasma Discharge