Abstract:Outdoor building stones are suffering from serious degradation. To restore internal cohesion and to alleviate the disintegration of decayed stones, consolidation treatment is necessary and significant. Up to date, no fully satisfactory consolidation agent and its application methodology are available, mainly due to the limited penetration depth of consolidants, low compatibility, or poor durability in environmental conditions. Herein, in this study, aiming to design an effective and enduring method for the consolidation of highly porous calcareous stones, nanosilica-based consolidation treatments were tested and compared with traditional compounds (tetraethoxysilane, alkylalkoxysilane, barium hydroxide). In order to evaluate their performance and compatibility, a series of standard tests, including the Drilling Resistance Measurement System (DRMS) test, surface color measurement, vapor diffusivity measurement, and peeling test, were carried out. Besides, the penetration depth and distribution profiles of consolidants were estimated by exploiting elemental raster scanning of SEM-EDS analysis performed throughout the thickness of samples. More importantly, by employing a climatic chamber, the artificial ageing test was also conducted by simulating harsh atmospheric conditions. After accelerated ageing, the performance of all consolidants was assessed again. Results demonstrated that the application of nanosilica (<10 nm in dimension) by cellulose poultice, followed by adding tetraethoxysilane with the classical method "wet on wet", is the best consolidation approach, in terms of in-depth consolidation efficacy, compatibility with the stone substrate, surface cohesion strength and performance durability in environmental conditions. Moreover, the treated surface is not hydrophobic, which allows further grouting and adhesion operations usually required for the restoration of historic buildings.

Silicone/silica Nanocomposites As Culture‐stone Protective Materials

Hydrophilic ZnO Nanoparticle-Based Antimicrobial Coatings for Sandstone Heritage Conservation

Performance of Silane -Based Surface Treatments for Protecting Degraded Historic Concrete

Hydrophilic Organosilicone Rubber: The New Organic-Inorganic Hybrid Consolidant For Ancient Earthen Architectures

Preparation and Characterization of Hydrophobic Nanosilica Protective Coating for Historic Stone

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Formation of Hydrophobic Silica Coatings on Stones for Conservation of Historic Sculptures

Preparation of TEOS-GPTMS-PDMS Hybrid Material and Its Application in the Protection of Concrete

A Durable Nano-SiO2-TiO2/dodecyltrimethoxysilane Superhydrophobic Coating for Stone Protection

Protection of carbonate stone by biomimetic chitosan/silica composite films

Cultural heritage protection via hybrid nanocomposite coating

Silica-based hybrids for adhesive coatings and their anti-salt damage in the protection of ancient sandstone

Application Research on Silicon-Fluoro-Acrylate Composite Emulsion for Stone Cultural Relic Protection

Superhydrophobicity, Photocatalytic Self-Cleaning and Biocidal Activity Combined in a Siloxane-ZnO Composite for the Protection of Limestone

Flexible-rigid Hybrid Siloxane Network for Stone Heritage Conservation

Dual hydrophilic/hydrophobic SiO2 transparent super-hydrophobic coating with good interfacial adhesion and high mechanical robustness

Preparation, characterization of nano-silica/fluoroacrylate material and the application in stone surface conservation

Enhanced consolidation efficacy and durability of highly porous calcareous building stones enabled by nanosilica-based treatments

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials

Durable Polymer Coatings: A Comparative Study of PDMS-Based Nanocomposites as Protective Coatings for Stone Materials

Study of TiO2-Modified Sol Coating Material in the Protection of Stone-Built Cultural Heritage