Abstract:White organic light-emitting devices(WOLED) have been attracting tremendous attention nowadays since from first being reported.They have many advantages such as their lightness and thinness,self light-(emission,) broad viewing angle,quick response,high efficiency,easy fabrication,low driving voltage,low(energy) consumption,low cost,etc.Therefore,they are becoming potential competitors in full color displays,backlights for liquid crystal displays and even next-generation of light sources.We fabricated a new type of white organic electroluminescent device using TBPe as blue fluorescent(dopant.) The configuration of the device is ITO/PVK∶TBPe/Alq_3∶rubrene/Mg∶Ag.In the device, PVK,Alq_3 and rubrene are used as hole transport material,electron transport material and orange fluorescent dopant,(respectively).By adjusting the thickness of each emitting layer and the adulterated proportion properly,a white light with CIE coordinates of(0.26,0.33) was generated,which is located in the white-light region.The CIE coordinate stayed virtually constant when the voltage increased from 8 V to 16 V.The device had a(maximum)luminance of 738 cd/m~2,a maximum external efficiency of(0.2%).For enhancing the brightness and chromaticity of the device,we attempted to use Zn(BTZ)_2 instead of Alq_3 as electron transport material.Bright white light,over 1 300 cd/m~2,was successfully obtained,and the maximum efficiency reached to(0.31)% at 8 V.In conclusion,the performance of the whole device was(increased) remarkably.We try to blend the polymer and small molecule organic material together as blue-light-emitting layer,which makes up the shortcoming for each other.The efficiency of white light-emitting is improved only by designing the device structure and changing the electron transport material reasonable.We make the device structure as simply as possible to satisfy the need of the practical use.

Effect of different spacers for performance enhancement on white organic light-emitting devices based on double emissive layers with homogeneous p-/n-type host

High Efficiency All Phosphorescent White Light-Emitting Diodes Based on Conjugated Polymer Host

Investigation on Spacers and Structures: A Simple but Effective Approach Toward High-Performance Hybrid White Organic Light Emitting Diodes

Effect of two yellow delta-emitting layers on device performance of phosphorescent white organic light-emitting devices

Effects of the Emission Layer Structure on the Electroluminescence Performance of the White Organic Light Emitting Diodes Based on Thermally Activated Delayed Fluorescence Emitters

Effect of Charge Carrier Transport Property and Energy Level of Host Material on Phosphorescent White Organic Light-Emitting Device

Properties of White Organic Electroluminescent Device with Double Light-Emitting Layers Based Upon Different Hosts

Effect Of A Delta-Doping Green Emitting Layer In White Organic Light-Emitting Device

Improved Performance of White Polymer Light Emitting Diodes

Influence of Dopant Concentration on Electroluminescent Performance of Organic White-Light-Emitting Device with Double-Emissive-Layered Structure

Effects of Emitting and Hole Transporting Layers on the Performance of White Organic Light-Emitting Divice

Improved Performance of Hybrid Organic/Inorganic P–n Heterojunction White Light‐Emitting Diodes with 4,4′‐cyclohexane‐1,1‐diylbis[ N , N ‐bis(4‐methylphenyl)aniline] As a Multifunctional Hole Transport Layer

Combined host-guest doping and host-free systems for high-efficiency white organic light-emitting devices

Efficient White Electroluminescent Device with Stable Emission Spectrum

Characteristics of a Double Layers White Organic Electroluminescent Device Using TBPe As Dopant in a Blue Mixed Layer

High-efficiency white organic light-emitting diodes based on phosphorescent iridium complex and 4,4′-Bis[N-1-napthyl-N-phenyl-amino]biphenyl emitters

High-Brightness, Broad-Spectrum White Organic Electroluminescent Device Obtained by Designing Light-Emitting Layers As Also Carrier Transport Layers

High Performance Organic Light-Emitting Diodes with Tunable Color Range from Orange to Warm White Based on Single Thermally Activated Delayed Fluorescence Emitter

Efficient Organic Blue Fluorescent Light-Emitting Devices with Improved Carriers' Balance on Emitter Molecules by Constructing Supplementary Light-Emitting Layer

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer

Multilayer White Organic Light-Emitting Diodes with A Single Host Material