Enhanced Microstructure Homogeneity and Mechanical Properties of AZ31 Magnesium Alloy by Repetitive Upsetting

W. Guo,Q. D. Wang,B. Ye,M. P. Liu,T. Peng,X. T. Liu,H. Zhou

DOI: https://doi.org/10.1016/j.msea.2012.01.111

IF: 6.044

2012-01-01

Materials Science and Engineering A

Abstract:An as-cast AZ31 Mg alloy in the form of thick plate (100mm diameter and 20mm height) with an initial grain size ∼200μm was processed by a novel severe plastic deformation technique, repetitive upsetting (RU). Experiments were carried out for 1, 3, and 5 deformation passes at 250, 300, and 350°C through route A and route B. Finite element analysis of the deformation process indicates homogeneous deformation during RU. With the number of RU passes, a finer grain size and more uniform microstructure are obtained along with significant improvement in both strength and ductility. A homogeneous grain structure with an averaged grain size of ∼2.6μm through route A and ∼1.6μm through route B are achieved after 5 passes at 350°C. A tensile strength of 304MPa and elongation of 28% are obtained in route B RU processing. AZ31 alloy exhibits a mean grain size of 1.3μm and yield strength of 294MPa and tensile strength of 354MPa after 5 RU passes at 250°C as compared to initial 43MPa and 174MPa, respectively.