Abstract:Titanium (Ti) and its alloys have been extensively used for biomedical applications and surface wettability makes large differences during their applications. Especially, superhydrophobic surfaces with water contact angle (WCA) > 150 degrees are under great interest and are now finding increased use in the biomedical arena. Up to now, most fabrication of superhydrophobic surface on Ti substrates would introduce external organics with low surface free energy (SFE), which could influence the intrinsic chemical components of Ti surface and face the risk of degradation when exposed for a long time. But it seems quite difficult to achieve superhydrophobic surfaces on Ti substrates without organic coating and few researches have been reported. Herein, a superhydrophobic Ti surface (WCA = 151.9 degrees) was successfully fabricated by a novel method including anodization, H2O2 and aging treatment. During this procedure, no external organics with low SFE were introduced. Then surface topography and roughness, 3D morphology, wettability, crystalline structure and chemical components of the as-prepared samples were characterized. The as-prepared surface was coated with a TiO2 layer, and exhibited a porous morphology with numbers of crater structures with roughness value (Ra) about 1.21 mu m. It was found the absorption of hydrocarbon and decrease of hydroxyl (OH) groups together changed the intrinsic wettability of Ti surface, where the removal of OH groups by H2O2 and aging treatment played a critical role. The results indicated that surface micro-roughness and declined intrinsic wettability were responsible for the formation of superhydrophobicity. This novel method could achieve superhydrophobicity without changing the intrinsic properties of Ti/TiO2 surface and would have great potential in biomedical applications.

Superhydrophobic surface by immobilization of polystyrene on vinyl-modified titania nanoparticles

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Superhydrophobicity of silica nanoparticles modified with polystyrene

Superhydrophobic Surfaces Fabricated by Spray-Coating Micelle Solutions of Comb Copolymers

Super-Hydrophobic Polystyrene Films Prepared Via Pattern Transformation

Superhydrophilic nano-TiO<SUB>2</SUB> film with porous surface structure

Superhydrophobic Aligned Polystyrene Nanotube Films with High Adhesive Force

Facile Fabrication Of Superhydrophobic Raspberry-Like Sio2/Polystyrene Composite Particles

Super-Hydrophobic Surface Prepared by Lanthanide Oxide Ceramic Deposition Through PS-PVD Process

Wettability Conversion from Superoleophobic to Superhydrophilic on Titania/Single-Walled Carbon Nanotube Composite Coatings

Preparation and Photocatalytic Wettability Conversion of TiO2-based Superhydrophobic Surfaces.

A Novel Method to Fabricate Organic-Free Superhydrophobic Surface on Titanium Substrates by Removal of Surface Hydroxyl Groups

Facile Creation of Superhydrophobic Surface with Fluorine–silicon Polymer under Ambient Atmosphere

A Versatile and Efficient Method to Fabricate Durable Superhydrophobic Surfaces on Wood, Lignocellulosic Fiber, Glass, and Metal Substrates

Facile Fabrication of Superhydrophobic Polymethyltriethoxysilane- Polymethylhydrosiloxane Coatings

Synthesis and self-cleaning properties of superamphiphobic coatings based on burr-like copolymer particles

Superhydrophobic Porous Surface Fabricated Via Phase Separation Between Polyhedral Oligomeric Silsesquioxane-Based Block Copolymer and Polyethylene Glycol

Control over the hydrophobic behavior of polystyrene surface by annealing temperature based on capillary template wetting method

A Novel Dissolution and Resolidification Method for Preparing Robust Superhydrophobic Polystyrene/Silica Composite

Fabrication and Tribological Properties of Super-Hydrophobic Surfaces Based on Porous Silicon

Superhydrophobic and mechanically robust polysiloxane composite coatings containing modified silica nanoparticles and PS-grafted halloysite nanotubes