Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

The Influence of the Surface Character of the Clays on the Properties of Poly(p‐dioxanone)/fibrous Clay Nanocomposites

Influence of Clay and Predispersion Method on the Structure and Properties of Polystyrene (ps)‐clay Nanocomposites

Thermal Degradation, Crystallization, and Rheological Behavior of Biodegradable Poly(p-dioxanone)/Synthetic Hectorite Nanocomposites

Characterization of Latex-Based Isotactic Polypropylene/clay Nanocomposites

Crystallization Behavior of Poly(p‐dioxanone)‐pu/montmorillonite Nanocomposites Prepared by Chain‐extending Reaction

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Investigation on the Melt Spinning Fibers of Pp/Organoclay Nanocomposites Prepared by In-Situ Polymerization

Effect of organoclay with various organic modifiers on the morphological, mechanical, and gas barrier properties of thermoplastic polyurethane/organoclay nanocomposites

Influence of organoclay filler and dicumyl peroxide (DCP) on the properties of the low-density polyethylene (LDPE)/thermoplastic starch (TPS) blend

Effects of clay contents on the dynamic mechanical and rheological properties of polypropylene/MAH-<i>g</i>-POE/clay composites

Structural and thermal stabilization of isotactic polypropylene/organo-montmorillonite/poly(ethylene-co-octene) nanocomposites by an elastomer component

Interactions between halloysite nanotubes and 2,5-bis(2-benzoxazolyl) thiophene and their effects on reinforcement of polypropylene/halloysite nanocomposites.

Surface properties and thermal stability of a novel low-surface-energy polybenzoxazine/clay nanocomposites

Preparation and properties of polypropylene/org-attapulgite nanocomposites

Synthesis and Characterization of Nylon 1012/clay Nanocomposite

Combined Effect of Organic Phosphate Sodium and Nanoclay on the Mechanical Properties and Crystallization Behavior of Isotactic Polypropylene

Crystallization, Morphology, and Dynamic Mechanical Properties of Poly(trimethylene Terephthalate)/clay Nanocomposites

Mechanical Properties and Morphology of the Clay/waterborne Polyurethane Nanocomposite

PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY AND ITS EFFECT ON THE THERMAL DEGRADATION IN IMMISCIBLE PP/PS BLENDS

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Preparation of poly(p -dioxanone)/sepiolite nanocomposites with excellent strength/toughness balance via surface-initiated polymerization