Abstract:Templating platinum group metal (PGM) nanostructures from microphase separated block copolymers (BCPs) allows for electrocatalytic activity to be studied on highly ordered, model surfaces with precisely controlled feature sizes and morphologies, thereby allowing catalyst electroactivity and stability to be probed as a function of nanoscale geometry. In our previous work [1], BCP templated electrocatalysts fabricated via incipient wetness impregnation of PGM precursors were tested for hydrogen oxidation/evolution and water-splitting activity on interdigitated electrodes using liquid and solid polymer electrolytes. This talk presents the fabrication of such electrocatalysts via Atomic Layer Deposition (ALD) and Physical Vapor Deposition (PVD) techniques (e-beam evaporation and sputtering). Self-assembled lamellae of poly-(styrene-block-methylmethacrylate) (PSbPMMA) thin films on Si wafer and glassy carbon substrates were subjected to 5 - 15 ALD cycles with trimethylaluminium (TMA) precursor to induce selective growth of alumina in the PMMA domains via Sequential Infiltration Synthesis. Thereafter, the polymer template was removed via Reactive Ion Etching (RIE) with oxygen plasma. The resultant alumina nanostructures templated from self-assembled PSbPMMA was then used as a substrate either for Platinum ALD with (trimethyl)methylcyclopentadienylplatinum(IV) precursor atop a Titanium Nitride adhesive layer, or for sputtering of Pt atop a Ti adhesive layer to obtain conformal Pt coatings of up to 20 nm in thickness. When e-beam evaporation was used, The PMMA domains were selectively removed by successive wet and dry etch steps, followed by deposition and lift-off. The PGM electrocatalyst nanostructures were characterized via a combination of electron microcopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and the Pt content of the catalysts were determined via microwave leaching and digestion of the electrocatalyst thin film followed by Inductively Coupled Plasma Mass Spectroscopy. The nanostructured electrocatalysts were tested for oxygen reduction (ORR) activity in a conventional rotating disk electrode setup using 0.1 M perchloric acid electrolyte, and the ORR mass activities and active surface area were obtained. [1] Bhattacharya, D., Arges, C. G., et al., Small, 2021, 17, 2100437

Block copolymer reduces, protects and mediates oriented growth into nano/submicron branched platinum

Synthesis of Pd-Pt Bimetallic Nanocrystals with a Concave Structure Through a Bromide-Induced Galvanic Replacement Reaction.

Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

Epitaxial Growth of Twinned Au-Pt Core-Shell Star-Shaped Decahedra As Highly Durable Electrocatalysts.

A Mesoporous Nanorattle‐Structured Pd@PtRu Electrocatalyst

Polyelectrolyte Assisted Synthesis and Enhanced Oxygen Reduction Activity of Pt Nanocrystals with Controllable Shape and Size

A novel Pt nanosponge foil with high activity for oxygen reduction reaction

Twin-Directed Deposition of Pt on Pd Icosahedral Nanocrystals for Catalysts with Enhanced Activity and Durability toward Oxygen Reduction

Versatile nanoarchitectonics of Pt with morphology control of oxygen reduction reaction catalysts

PdPt bimetallic nanoparticles enabled by shape control with halide ions and their enhanced catalytic activities.

Intermetallic hcp-PtBi/fcc-Pt Core/Shell Nanoplates Enable Efficient Bifunctional Oxygen Reduction and Methanol Oxidation Electrocatalysis

Highly Ordered Pt-Based Nanoparticles Directed by the Self-Assembly of Block Copolymers for the Oxygen Reduction Reaction

Synthesis, Purification, and Electrocatalytic Activity of Platinum Nanocatalyst with Globular Dendritic Structure

Liquid-Phase Templateless Synthesis of Pt-on-Pd0.85Bi0.15 Nanowires and PtPdBi Porous Nanoparticles with Superior Electrocatalytic Activity

Fabrication of Block Copolymer Templated Extended Surface Model Electrocatalysts By Atomic Layer Deposition and Physical Vapor Deposition

An elegant 3D-ordered hierarchically porous framework to anchor Pt nanocrystals for durable oxygen reduction reaction

Epitaxial Growth of Ultrathin Highly Crystalline Pt–Ni Nanostructure on a Metal Carbide Template for Efficient Oxygen Reduction Reaction

Microwave-induced formation of platinum nanostructured networks with superior electrochemical activity and stability.

Synthesis of Pt−Pd Core−Shell Nanostructures by Atomic Layer Deposition: Application in Propane Oxidative Dehydrogenation to Propylene

Enhanced O2 Reduction on Atomically Thin Pt-based Nanoshells by Integrating Surface Facet, Interfacial Electronic, and Substrate Stabilization Effects

Control over the Branched Structures of Platinum Nanocrystals for Electrocatalytic Applications