Abstract:Most engineering structures are exposed to various harsh environments, such as temperature fluctuations and humidity cycles, simultaneously. Additionally, moisture transfer and corrosive ion transport in concrete are driven by humidity gradients. Therefore, studying Chloride transport in concrete under constant humidity conditions is a meaningful research project. In this work, a new experimental setup was designed, and the Chloride diffusion behavior of concrete under a continuous humidity environment and NaCl immersion was investigated. Meanwhile, to accurately evaluate the internal humidity of concrete, humidity sensors were applied to the concrete. Additionally, the impacts of the water-binder ratio (w/b) and ambient humidity on the humidity diffusion coefficient, free Chloride content and bound Chloride content in concrete were evaluated. The microstructure was characterized by scanning electron microscopy, X-ray diffraction and mercury intrusion porosimetry. The results show that the content of free Chloride increases with an increasing w/b ratio. The humidity diffusion coefficient of concrete during water absorption (continuous high humidity environment) is significantly higher than that during water loss (continuous dry environment). Furthermore, under the drying condition, the Chloride content and the humidity diffusion coefficient on the concrete surface gradually increased, while during the wetting procedure, the Chloride content inside the concrete increased, and the humidity diffusion coefficient gradually decreased. However, the bound Chloride content inside the concrete is not affected by the humidity level in the environment. In the wetting environment, the calcium hydroxide in the matrix is gradually consumed, and the Chloride diffuses to the matrix to form more Friedel's salt and calcium carbonate. Moreover, lowering the w/b ratio or increasing the ambient humidity can enhance the formation of more hydrated compounds (C–S–H gel), which can reduce the total porosity and can also improve the ability of concrete to resist Chloride diffusion. Overall, this study provides a better understanding of and insight into the design and maintenance of seaside RC infrastructures.

The Transport Properties of Concrete under the Simultaneous Coupling of Fatigue Load and Environment Factors

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

Study On Relationship Between Chloride Diffusion In Concrete And Time

Chloride Transport Behavior in Bending-Shear Section of Reinforced Concrete Beam under Combined Effect of Load and Environment

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

Comparative Study On Testing Methods Of Chloride Ions Diffusion Coefficient In Concrete

Experimental Study on Chloride Ion Transport in Concrete Structure under Shear Stress

Durability Of Concrete Under Coupling Effects Of Cyclic Loads And Chloride Environment

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Chloride Penetration into Concrete Damaged by Uniaxial Tensile Fatigue Loading

Chloride Transport in Concrete under Sustained Flexural Loading

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Stochastic investigation on three-dimensional diffusion of chloride ions in concrete

Differences between Time-Dependent Instantaneous and Apparent Chloride Diffusion Coefficients of Concrete in Tidal Environment

Investigation on the Transport Properties of Chlorides in Concrete II Numerical Simulation

Time-Dependent and Stress-Dependent Chloride Diffusivity of Concrete Subjected to Sustained Compressive Loading

An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete

Multidimensional Transport Experiment and Simulation of Chloride Ions in Concrete Subject to Simulated Dry and Wet Cycles in a Marine Environment

Influence of Initial Curing Conditions and Exposure Environments on Chloride Migration in Concrete Using Electrochemical Method

Chloride Penetrating under Co-Effects of Initial Curing and Exposure Conditions

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors