Abstract:New toughened poly(butylene terephthalate) (PBT)/poly(ethylene terephthalate) (PET) (40/60 wt%) blends were obtained by melting with Glycidyl methacrylate grafted poly(ethylene octane) copolymer (POE-g-GMA), varying the POE-g-GMA content up to 20 wt%, in a twin-screw extruder, followed by injection molding. The influence of POE-g-GMA on the properties of the PBT/PET blends was investigated by mechanical testing, Fourier transform infrared (FT-IR) analysis, gel fractions analysis, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC) and scanning electronic microscopy (SEM). The mechanical testing results indicated that the incorporation of POE-g-GMA led to increases in the notched impact strength and decreases in the tensile strength, flexural strength, and flexural modulus. When POE-g-GMA content reached 20 wt%, the notched impact strength (8.0 kJ m(-2)) was achieved for the PBT/PET/POE-g-GMA blends. FT-IR results proved that some PBT/PET/POE-g-GMA copolymers were produced, which improved the compatibility between POE-g-GMA and the PBT/PET matrix. The extent of crosslinking was observed by gel fraction measurements. DMA results further testified chain-extending and micro-crosslink reactions occurred between POE-g-GMA and PBT/PET blends. In addition, the reactions induced by POE-g-GMA affected the crystallization behavior of PBT/PET blends obviously, as observed from DSC results. By means of SEM observation of the impact fracture surface morphology, and the discussion of the micro-crosslink reaction process between the epoxide-containing elastomers and PBT/PET matrix, the toughening mechanism was proposed to be taken into account the shear yielding of PBT/PET matrix and cavitation of elastomer particles.

Polyisobutylene-based Modifiers for Glass Fiber Reinforced Unsaturated Polyesters Composites

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

SYNTHESIS OF GLYCIDYL METHACRYLATE GRAFTED LIQUID POLYISOBUTYLENE AND ITS EFFECT ON UNSATURATED POLYESTER

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Toughening of Pbt/Pc Blends with Epoxy Functionalized Core-Shell Modifiers

Improved Interlaminar Properties of Glass Fiber/Epoxy Laminates by the Synergic Modification of Soft and Rigid Particles

Toughening Modification on Self-Reinforced Composite of the Rpet Fibers/rpetg

Mechanical Properties of Glass Fiber and Liquid Crystalline Polymer Reinforced Polypropylene Hybrid Composites Toughened with Elastomers

Toughening Modification of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Blends by an Epoxy-Functionalized Elastomer

Interfacial Flame Retardant Unsaturated Polyester Composites with Simultaneously Improved Fire Safety and Mechanical Properties

Fabricating super tough polylactic acid based composites by interfacial compatibilization of imidazolium polyurethane modified carbon nanotubes

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Toughening of Recycled Poly(ethylene Terephthalate)/glass Fiber Blends with Ethylene–butyl Acrylate–glycidyl Methacrylate Copolymer and Maleic Anhydride Grafted Polyethylene–octene Rubber

Study of Polylactic Acid/Liquid Polyisobutene Blends

Effect of PPO‐g‐MA on Structures and Properties of PPO/PA6/short Glass Fiber Composites

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

Toughening of Poly(butylene Terephthalate) with Epoxy-Functionalized Acrylonitrile–butadiene–styrene

Study on interfacial adhesion of UP/PU block copolymer and glass fiber

Preparation and Properties of PMMA Blends with High Toughness