Abstract:Flexible superhydrophobic surfaces have been attracting more and more attention due to their foldable property. However, the superhydrophobic structure was easily damaged or destroyed owing to their poor interfacial force between substrate and superhydrophobic coating. Herein, fluorinated silica nanoparticles (F-SiO 2 ) were sprayed onto the wet poly(amide–imide) (PAI) surface, which made F-SiO 2 easily went into PAI substrate to enhance the durability of superhydrophobic surface. The PAI/F-SiO 2 flexible surface exhibited a water contact angle (CA) of beyond 160° and a sliding angle (SA) of as low as 3°, while the tensile strength (34 MPa) was comparable to that of PAI substrate (35.8 MPa). Encouragingly, the superhydrophobicity and hierarchical porous structure of PAI/F-SiO 2 surface were maintained even they were folded by 5000 times or underwent sandpaper abrasion test (500 cm of wear on a 1200 grit sandpaper under 50 g load), while the nanocomposites failed the sandpaper abrasion test when F-SiO 2 were sprayed onto completely dried PAI surface. More importantly, the CA and SA just slightly decreased when PAI/F-SiO 2 surfaces were heated at 300 °C for 24 h due to the unique surface morphology and high thermal stability of PAI, which is one of the highest thermal stabilities for flexible superhydrophobic films. In addition, PAI/F-SiO 2 surfaces maintained superhydrophobic after hot water jet impact, acid–base immersing, UV irradiation, and ultrasonic treatment, indicating the fabricated surfaces could be used for practical application especially under harsh conditions. Furthermore, the superhydrophobic surfaces possessed icephobic properties. It should be noted that PAI/F-SiO 2 surfaces showed such excellent properties, although their fabricating procedure did not undergo any optimization. This wet spraying method was also used to fabricate flexible superhydrophobic surfaces with other polymers as substrates such as poly(acrylic acid) (PAA), thermoplastic polyurethane (TPU), polystyrene (PS), and poly(vinyl alcohol) (PVA). Therefore, the simple strategy provided a general route to prepare flexible superhydrophobic films with high durability.

Bio-Inspired Adhesive Superhydrophobic Polyimide Mat with High Thermal Stability

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Flexible biomimetic materials with excellent photothermal performance and superhydrophobicity

Facile fabrication of flexible superhydrophobic surfaces with high durability and good mechanical strength through embedding silica nanoparticle into polymer substrate by spraying method

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Highly sticky surfaces made by electrospun polymer nanofibers

A Facile All-Solution-Processed Surface with High Water Contact Angle and High Water Adhesive Force

Robust interface-free superhydrophobic polymer-based composites with recoverable and anti-icing properties

A facile fabrication of acid-proof membranes with superhydrophobic high adhesion in air

PDMS-Based Hierarchical Superhydrophobic Fabric Coating Fabricated by Thermal Treatment and Electrostatic Flocking Technology

Development of Adjustable High- to Low-Adhesive Superhydrophobicity Using Aligned Electrospun Fibers

Biomimetic construction of three-dimensional superhydrophobic microfiber nonwoven fabric

Super‐Tough and Fast Adhesion of Soft Elastomer Based on Strong Noncovalent Interaction in Diverse Environments

Substrate-versatile Approach to Fabricate Mechanochemically Robust and Superhydrophobic Surfaces from Waste Fly Ash

Facile Fabrication of Potent Superhydrophobic Surface on Physical Barriers with Enhanced Anti-Adhesion Efficiency

Liquid‐pressure‐guided superhydrophobic surfaces with adaptive adhesion and stability

Superhydrophobic Flexible Silicone Rubber with Stable Performance, Anti-Icing, and Multilevel Rough Structure

Preparation and Properties of Electrospun Phenylethynyl—Terminated Polyimide Nano-Fibrous Membranes with Potential Applications as Solvent-Free and High-Temperature Resistant Adhesives for Harsh Environments

A durable and sustainable superhydrophobic surface with intertwined cellulose/SiO2 blends for anti-icing and self-cleaning applications

Manipulating Small Water Droplets on a Photo-Switchable Mat of Fluorinated Linear Liquid Crystal Polymers

UV-assisted stabilization of superhydrophobic nanofibrous membranes for waterproof, breathable and thermal insulation applications