Abstract:A new catalyst (Fe2(SO4)3-NaCl) was employed for the selective conversion of corncob hemicellulose to xylose via hydrothermal treatment. The optimal conditions included Fe2(SO4)3-NaCl treatment for 2 h at 140 °C to achieve the selective conversion of hemicellulose (92.4 wt%) and a xylose yield of 106.8 wt%, which is based on the hemicellulose content in corncobs. These conditions led to a cellulose and lignin dissolution of 7.9 and 21.2 wt%, respectively. Fe2(SO4)3 was found to play an important role, rather than NaCl, in the disruption of interactions among the three major components, while the conversion of lignin and cellulose was inhibited by NaCl and Fe2(SO4)3, respectively. The co-addition of Fe2(SO4)3 and NaCl promoted the selective dissolution of hemicellulose, leaving most of the cellulose and lignin unreacted in the solid residue. Additionally, Fe2(SO4)3 inhibited the formation of formic and acetic acids. A second hydrothermal treatment on the hemicellulose-free residue with the same catalytic system at 140 °C for 2 h resulted in 42.2 wt% cellulose conversion and a fructose yield of 79.7 wt% based on converted cellulose. Therefore, a potential route for the comprehensive utilization of corncobs is proposed.

FeCl 3 and acetic acid co-catalyzed hydrolysis of corncob for improving furfural production and lignin removal from residue

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

Influence of inorganic acids on the dehydration of fructose to 5-hydroxymethylfurfural over AlCl3 catalyst

Catalytic hydrolysis of corncob for production of furfural and cellulose-rich solids: Product characterization and analysis

Production of 2,5-Furandicarboxylic Acid by Optimization of Oxidation of 5-Methyl Furfural over Homogeneous Co/Mn/Br Catalysts

Enzymatic Hydrolysis of Corncob and Ethanol Production from Cellulosic Hydrolysate

Fenton Reaction-Modified Corn Stover to Produce Value-Added Chemicals by Ultralow Enzyme Hydrolysis and Maleic Acid and Aluminum Chloride Catalytic Conversion

Corn Stover Valorization by One-Step Formic Acid Fractionation and Formylation for 5-Hydroxymethylfurfural and High Guaiacyl Lignin Production.

High concentration ethanol production from corncob residues by fed-batch strategy.

Phosphotungstic acid functionalized biochar for furfural production from corncob

Enzymatic Hydrolysis of Corncob Residues of Furfural Manufacture and Optimum Conditions for Cellulose Conversion

One-pot Co-Catalysis of Corncob with Dilute Hydrochloric Acid and Tin-Based Solid Acid for the Enhancement of Furfural Production

[Enzymatic Hydrolysis of Corn Cob Residues from Furfural Production].

An integrated lignocellulose biorefinery process: Two-step sequential treatment with formic acid for efficiently producing ethanol and furfural from corn cobs

Catalytic conversion of corncob and corncob pretreatment hydrolysate to furfural in a biphasic system with addition of sodium chloride

Coupling process for preparing biomass-based furfural and levulinic acid from corncob: Extraction, green chemistry and techno-economic assessment

Kinetics of Furfural Production from Corn Cob in γ-Valerolactone Using Dilute Sulfuric Acid as Catalyst

Optimization of formic acid hydrolysis of corn cob in xylose production

Selective conversion of corncob hemicellulose to xylose via hydrothermal treatment with Fe2(SO4)3 and NaCl

Catalytic conversion of corncob to furfuryl alcohol in tandem reaction with tin-loaded sulfonated zeolite and NADPH-dependent reductase biocatalyst