Utilizing magnetic nanoparticles embedded into polyvinyl alcohol and sodium alginate for the absorption of arsenic
Chung-Fu Huang,An-Chi Huang,Wei-Ting Chen,Cheng-Yong Wu,Terng-Jou Wan
DOI: https://doi.org/10.1016/j.jlp.2024.105348
IF: 3.916
2024-05-12
Journal of Loss Prevention in the Process Industries
Abstract:Arsenic is an extremely toxic metalloid. The majority of arsenic water pollution originates from industrial activities such as mining, smelting, and utilization of arsenic compounds in glass, pigment, semiconductor, and other industries. Arsenic-containing wastewater poses a threat to groundwater, freshwater, seawater, and soil. Bioaccumulation of arsenic as a result of accidental ingestion may have a harmful effect on the skin and cardiovascular, respiratory, and nervous systems, thereby posing a major health risk. Chemical coagulation, membrane filtration, and adsorption can be used to treat arsenic-containing wastewater. However, chemical coagulation produces a large amount of waste sludge, which is harmful and incurs high processing costs. Membrane filtration is difficult to adopt because of its high operation and maintenance costs. Adsorption is an inexpensive, easy-to-use, sludge-free water treatment method that enables adsorbent recycling. These characteristics make adsorption an economically feasible technique for water treatment. Magnetic nanoparticles (MNPs) are small particles with a high surface area to volume ratio. Their strong magnetic properties enable them to absorb specific water pollutants. MNPs are currently used as water treatment adsorbents. However, they have several drawbacks, including low acid and alkali buffer capacity and water oxidation. In this study, MNPs immobilized with polyvinyl alcohol (PVA) and sodium alginate (SA) were used to enhance the efficacy of wastewater treatment with magnetic materials. These modified MNPs exhibited magnetic characteristics and improved acid resistance. When 100 g/L PVA/SA-MNPs (pH 1–6) were stirred at 120 rpm for 30 min, the resulting iron concentration of the water was 16 mg/L. By contrast, the MNPs released iron in levels ranging from 18 to 4,045 mg/L. The PVA/SA–MNPs efficiently adsorbed arsenic in the pH range 3–6, with a high removal efficiency of 76% to 82%. At pH 5, the average adsorption capacity was 382 ± 27 μg/g. To recover the MNPs, they were rinsed with deionized water and immersed in acid three times, after which their adsorption capacity was 300 μg/g or higher. By contrast, the PVA/SA-MNPs could be recovered through spontaneous sedimentation, eliminating the need for a magnetic field and simplifying the collection process. In addition, iron dissolution in acidic solutions was minimized for the PVA/SA-MNPs, contributing to environmental protection.
engineering, chemical