Abstract:The uncertainty of the turbulence/transition model is a problem with relatively high attention in the CFD area. Wall distance is an important physical parameter in turbulence/transition modeling, and its accuracy has a large effect on numerical simulation results. As most CFD solvers use the solving strategy to calculate the nearest distance to the wall based on mesh topology, this makes wall distance one important source of the uncertainty of the simulation results. To investigate the role of wall distance in turbulence/transition simulations, we have conducted simulations for various aerodynamic shapes, such as the plate with zero pressure gradient (ZPG), RAE2822 supercritical airfoil and ONERA M6 transonic wing. Further, the prediction abilities on turbulence/transition and shock wave phenomena of several physical models, including SA, SST and Wilcox-k-ω turbulence models as well as the γ-Reθt-SST transition model, are analyzed with different degrees of mesh orthogonality. The results imply that the numerical solution of wall distance in the boundary layer has a relatively large error when the mesh orthogonality is bad, having a large effect on the accuracy of the turbulence/transition model. In detail, the Wilcox-k-ω turbulence model is unaffected by mesh orthogonality; under the condition of mesh non-orthogonality, the SA model leads to a substantially larger friction drag and change in the location of shock wave; the SST model also leads to a larger friction drag under the condition of mesh non-orthogonality, whose effect is much less than that for SA model; and the γ-Reθt-SST model leads to a substantial upstream shift of transition location.

Aeroelastic Wind-Tunnel Test for Aerodynamic Uncertainty Model Validation

Aero-Elastic Wind Tunnel Test of A High Lighting Pole

Model Validation Via Uncertainty Propagation and Data Transformations

Experimental and Numerical Flutter Analysis Using Local Piston Theory with Viscous Correction

Machine learning based uncertainty quantification of turbulence model for airfoils

Nonparametric Modeling and Vibration Analysis of Uncertain Jeffcott Rotor with Disc Offset

Evaluation of uncertainty in a vortex flowmeter measurement

Adjoint Design Optimization Under the Uncertainty Quantification of Reynolds-Averaged Navier-Stokes Turbulence Model

A confidence-based aerospace design approach robust to structural turbulence closure uncertainty

Uncertainty Quantification of a Wind Tunnel-Informed Stochastic Wind Load Model for Wind Engineering Applications

Modal identification from turbulence response based on improved frequency domain decomposition

Physically constrained eigenspace perturbation for turbulence model uncertainty estimation

Probabilistic Prediction of Coalescence Flutter Using Measurements: Application to the Flutter Margin Method

Comparing Turbulence Models for CFD Simulation of UAV Flight in a Wind Tunnel Experiments

Effects of the Uncertainty of Wall Distance on the Simulation of Turbulence/Transition Phenomena

Assessment of low-altitude atmospheric turbulence models for aircraft aeroelasticity

Extending turbulence model uncertainty quantification using machine learning

An Efficient Coupled-Mode Flutter Analysis Method for Turbomachinery

Experimental Flutter Analysis over Different Selected Wing Planforms by Varying the Wing Cross Section Geometry

Research on precise and standardized numerical simulation strategy for vehicle aerodynamics