Abstract:With appropriate geometry configurations, bistatic synthetic aperture radar (SAR) can break through the limitations of monostatic SAR on forward-looking imaging. Owing to such a capability, bistatic forward-looking SAR (BFSAR) has extensive potential applications. In BFSAR, the compensation of the spatially variant motion errors is of great significance to get a well-focused image. In this paper, first, the spatial-variance properties of motion errors are analyzed analytically and quantitatively. Different from the side-looking monostatic and bistatic SAR, 2-D space-variant motion errors should be taken into consideration in BFSAR. The 2-D spatial variance of the motion errors can be categorized into two parts, range-variant motion errors of the transmitter and azimuth-variant motion errors of the receiver. Moreover, these two parts are independent of each other. Based on this property analysis, second, a motion compensation (MoCo) approach with cubic-order processing is proposed to deal with the spatially variant motion errors in BFSAR. In the cubic-order processing, the first-order MoCo is performed to correct the spatially independent motion errors on the raw data. The second-order MoCo is accomplished on the non-range-cell-migration (RCM) data to deal with the range-variant errors. After the second-order MoCo, since the signal direction of the non-RCM data coincides with the variant direction of the uncompensated phase errors, the azimuth-variant motion errors and slow time signal are coupled together. To cope with such a problem, the slow time signal is transformed into the direction perpendicular to the azimuth by a novel procedure named azimuth-slow time decoupling. At this stage, the coupling between the azimuth-variant motion errors and slow time signal has been eliminated. Azimuth-variant motion errors can be corrected precisely. Simulation and experimental results verify the effectiveness of the proposed method.

Azimuth-variant compensation in subaperture processing of curved trajectory SAR

Focusing of Bistatic SAR With Curved Trajectory Based on Extended Azimuth Nonlinear Chirp Scaling

A Compensation Method for Airborne SAR with Varying Accelerated Motion Error

Adaptive Subaperture Approach for Spotlight SAR Azimuth Processing

An effective focusing approach for azimuth invariant bistatic SAR processing

A Two-Step Nonstop-and-Go Phase Compensation Method for Spaceborne SAR With High-Resolution High-Squint-Angle and Wide-Swath

Motion Errors and Compensation for Bistatic Forward-Looking SAR with Cubic-Order Processing

Meo Spaceborne-Airborne Bisar Imaging Algorithms Based on Azimuth Spatial Variation Compensation

Improved Parametric Polar Format Algorithm for High-Squint and Wide-Beam SAR Imaging

Unified Imaging Algorithm for Multimode General Bistatic SAR with Complex Trajectory

Azimuth-Variant Phase Error Calibration Technique for Multichannel SAR Systems.

A Multi-channel Motion Compensation Algorithm Based on Adaptive Sub-aperture Division for Terahertz Circular SAR

Spatial-Variant Phase Error Compensation for Widebeam Spotlight Synthetic Aperture Radar

Azimuth Variant Motion Error Compensation Algorithm for Airborne SAR Imaging Based on Doppler Adjustment

Impact of Trajectory Deviation in Squint Airborne SAR Processing

Two-dimensional Frequency Decoupling Method for Curved Trajectory Synthetic Aperture Radar Imaging

Spatially Variable Phase Filtering Algorithm Based on Azimuth Wavenumber Regularization for Bistatic Spotlight SAR Imaging under Complicated Motion

Focusing Highly-Squinted FMCW SAR Data Using the Modified Wavenumber-Domain Algorithm

Modeling and Processing of Two-Dimensional Spatial-Variant Geosynchronous SAR Data

Squinted Airborne Synthetic Aperture Radar Imaging with Unknown Curved Trajectory

Bistatic SAR Spatial-variant Motion Error Compensation Method Via Joint-refocusing of Multi-subimages