Abstract:The analog-to-digital converter (ADC) is a key building block of today's high-volume systems-on-a-chip (SoCs). Built-in-self-test (BIST) is the most promising solution to testing deeply-embedded ADCs. Cost-effective stimulus source with on-chip integrability has been viewed as the bottleneck of ADC BIST, and consequentially the bottleneck of SoC BIST and BIST-based self-calibration. The deterministic dynamic element matching (DDEM) technique has been proposed as a solution to this problem. In this work, rigorous theoretical analysis is presented to show the performance of a DDEM digital-to-analog converter (DAC) as an ADC linearity test stimulus source. Guided by the insight obtained this analysis, a systematic approach for cost-effective DDEM DAC design is proposed. Two generations of DDEM DACs have been designed, fabricated, and measured. 12-bit equivalent linearity was achieved from the first DDEM DAC with 8-bit apparent resolution and less than 5-bit raw linearity after systematic error compensation. The achieved 12-bit linearity outperforms any on-chip stimulus source in literature. Based on the first design, a new DDEM DAC with 12-bit apparent resolution, 10-bit raw linearity, and 9-bit DDEM switching was designed with improved design technique. This DAC was fabricated in standard 0.5-pm CMOS technology with a core die area of 2 mm2. Clear ramp signals could be observed on an oscilloscope when the DDEM DAC was clocked at 100 MHz. Laboratory testing results confirmed that the new DDEM DAC achieved at least a 16-bit equivalent linearity; this was limited by the available instrumentation, which has 18-bit linearity. It outperforms any previously reported on-chip stimulus source in terms of ADC BIST performance by 5 bits. The robust performance, low cost, and short design cycle for on-chip implementation make DDEM an enabling technology for SoC BIST and self-calibration. Two new approaches based on DDEM are developed to further boost the die area efficiency, improving the basic DDEM approach. The first is termed segmented DDEM, and the second is dither-incorporated DDEM (DiDDEM). It has been shown through mathematical analysis and simulation that these can maintain the performance of the basic DDEM approach while greatly reducing the implementation cost.

Binary tree structure random Dynamic Element Matching technique in current-steering DACs

Novel DEM Technique for Current-Steering DAC in 65-Nm CMOS Technology

A 12-BIT 400-Ms/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

A Novel Dynamic Element Match Technique in Current-Steering DAC

A Novel Dynamic Element Matching Technique In Current-Steering Dac

A 12-Bit 1gs/s Current-Steering DAC with Matching Capacitor in Switched Current Cell

Analysis and Modeling of Dynamic Error in Current-Steering DAC

A New Current Switch Driver with Improved Dynamic Performance Used for 500ms/s, 12-Bit Nyquist Current-Steering DAC.

A random DEM technique with minimal element transition rate for high-speed DACs

A 14-Bit 1.0-Gs/S Dynamic Element Matching Dac With > 80 Db Sfdr Up To The Nyquist

A 14-Bit 3-Gs/s DAC Achieving SFDR >63db Up to 1.4ghz with Random Differential-Quad Switching Technique

A 10-bit Current-steering DAC with Segmented Randomized Thermometer-coding

Thermo Data-Weighted Average Dynamic Element Matching (Dem) Encoder For Current-Steering Dacs

Dynamic Element Matching with Signal-Independent Element Transition Rates for Multibit $\delta\sigma$ Modulators

A 2 GS/s 14-Bit Current-Steering DAC in 65 Nm CMOS Technology for Wireless Transmitter

Demystifying and Mitigating Code-Dependent Switching Distortions in Current-Steering DACs

Analysis and Modeling of the Glitch Error in Current-Steering D/A Converter

Nyquist-rate Time-Interleaved Current-Steering DAC with Dynamic Channel Matching.

Testing High Resolution Adcs With Low Resolution/Accuracy Deterministic Dynamic Element Matched Dacs

Deterministic dynamic element matching: an enabling technology for soc built-in-self-test

Dynamic Mismatch Compensation (Dmc) Algorithm For Amplitude And Timing Errors In Current-Steering Dacs