Abstract:Reading reliability is a critical aspect in the ultrahigh-frequency radio frequency identification (RFID) system when a large amount of tags are in the reading zone with complex multi-path interferences. The read failure incidences can be caused not only by the random tag position and orientation but also by the RF shadowing of other objects and tags, both of which can misalign the main lobes of the tag and reader antennas. To increase the system coverage and total read yield in practical indoor ambient, a possible solution is to employ multiple readers with overlapping reading zones. However, when the tags are within the reading zones of multiple readers, the conventional tag singulation protocol will suffer serious reader-to-reader collision (R2RC) unless the conflicting readers can agree on proper collaborative time or space division schemes. The uncertain delay of the time division multiple access and the lack of definitive time sequence can further affect the reading process, especially when the RFID system is employed for applications requiring real-time accessing, tracking, and sensing. In this paper, we introduce a collaborative reader code division multiple access (CDMA) protocol in the harmonic RFID system, which provides synchronous tag access for all readers within range. The tag can distinguish the downlink commands from multiple readers simultaneously and then formulate the response accordingly. The proposed reader CDMA is demonstrated in a simple experimental prototype to verify R2RC resolution and read yield improvement. The tworeader collaborative CDMA scheme achieved below 10(-5) in the read failure rate when individual readers had 0.05 - 0.2 failure rates in the complex multi-path scenarios due to rich channel exploitation and anti-correlation in the failure incidences.

A Multi-Reader Joint Detection Scheme for Dense RFID Networks

An IDMA-based detection scheme for dense RFID networks

Master-slave Dual Readers Enhanced Aloha Anti-Collision Mechanism for Dense Active RFID

A MIMO-based Backscattering RFID with Interleave Division Multiple Access for Real-Time Sensing Applications

Channel arrangement in multi-reader RFID system

Dual-Reader Wireless Protocols for Dense Active Rfid Identification

Collaborative Reader Code Division Multiple Access in the Harmonic RFID System

Shelving Interference and Joint Identification in Large-Scale RFID Systems

Design and Optimization of a CDMA-Based Multi-Reader Passive UHF RFID System for Dense Scenarios

Exploring Tag Distribution in Multi-Reader RFID Systems

Design for the reader of UHF Radio frequency identification

Concurrent Rate-Adaptive Reading With Passive RFIDs

Facilitating an Active Transmit-only RFID System Through Receiver-based Processing

A Protocol Stack for Large-Scale RFID Systems: Mitigating Reader and Tag Collisions

A High Time-Efficient Missing Tag Detection Scheme for Integrated RFID Systems

Joint Active User Detection and Channel Estimation in Massive Access Systems Exploiting Reed-Muller Sequences

Separation of Multiple Passive RFID Signals Using Software Defined Radio

A Low Delay Multiple Reader Passive RFID System Using Orthogonal TH-PPM IR-UWB.

Real-time code-division multi-tag localization with centimeter accuracy

STEP: A Time-Efficient Tag Searching Protocol in Large RFID Systems

Code Division Multiple Access in Centimeter Accuracy Harmonic RFID Locating System