Abstract:Prototype measurements belong to the key steps in the development of antenna structures. Although accurate validation of their far-field performance can be realized in dedicated facilities, such as anechoic chambers, the high cost of their construction and maintenance might not be justified if the main goal of measurements is to support teaching or low-budget research. Instead, they can be performed in non-anechoic conditions and then refined using appropriate correction algorithms. Unfortunately, the existing post-processing methods suffer from multiple challenges that include manual setup of parameters as well as validation of performance in idealized conditions. In this communication, a multi-taper-based framework for correction of antenna characteristics obtained in non-anechoic environments has been proposed. The algorithm augments one-shot measurements of the structure under test in order to extract the line-of-sight responses while attenuating the interferences pertinent to multi-path propagation and noise from external sources of radiation. The performance of the proposed correction routine has been demonstrated in two test sites using a geometrically small Vivaldi radiator and validated against state-of-the-art techniques from the literature. The uncertainty budget for the measurements performed using the approach amounts to 0.26 dB, which is low given challenging propagation conditions considered for experiments.

Numerical Simulation Study of Ota Anechoic Chamber Ripple Quality

Auto-tuning Numerical Method for Acoustic Wave Simulation Using Analytical Solution

Theoretical and Numerical Studies of Off-Shore Oscillating Water Column Wave Energy Device

An Efficient Total Radiated Power Test Method Based on Optimal Interpolation over a Sphere of Large Antenna Array

Two Characterization Methods of Ripple Errors for the Large Square Aperture.

Numerical Simulation and Structure Optimization of Compressor Muffler

A Study on the Near Field Oam Using the Rigorous Numerical Methods

Measurement of the Quiet Zone Performance of Microwave Anechoic Chamber

Equalization in Underwater Acoustic Orbital Angular Momentum Mode-Division Multiplexing

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Tolerance Modeling and Analysis Considering Form Defects for Spaceborne Array Antenna

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

Numerical Study on Wave Dissipation Performance of OWC-Perforated Floating Breakwater under Irregular Waves

Uncertainty of Validating Semi-Anechoic Chambers for Radiated Emmision Measurement

Improving Field Uniformity Using Source Stirring with Orbital Angular Momentum Modes in a Reverberation Chamber

A Review of Over-the-Air Testing Methods for Performance Measurement of Antennas and Devices in Communication Systems

Wideband Inverse Matrix for Radiated Two-Stage MIMO Measurements

A rigorous link performance and measurement uncertainty assessment for MIMO OTA characterisation

Multi-Taper-Based Automatic Correction of Non-Anechoic Antenna Measurements

Key issues and algorithms of multiple-input-multiple-output over-the-air testing in the multi-probe anechoic chamber setup

A Low-Cost and Efficient Single Probe Based MIMO OTA Measurement Method