Abstract:During the commissioning of Nuclear power plant unit, it is necessary to perform the transient condition test that the single pump operation of Main Feedwater (APA) pump triggers the rapid load rejection of steam turbine. Due to the sudden loss of a main water supply pump during the test, the level of the steam generator will change dramatically. If there is a signal of "SG level low plus steam / water flow mismatch" or a signal of "SG level low low", the reactor trip protection will be triggered. PI controller is used as the core controller of the main feed water pump control process. The optimal parameters of PI controller directly affect the level control performance of steam generator. At present, the units that have completed the test only verify that the control system meets the requirements of transient conditions, but it does not solve the phenomenon that the oscillation frequency of the feed water regulating system is too high under stable conditions. In this paper, the safety range of the control parameters under transient condition is determined by simulation model test, and then the steady-state performance of the parameters is improved by field test, so the optimization of the control parameters is completed, and the regulation performance of the feed water control system under single pump operation and steady-state condition of the main feed water pump is improved, and practical results are achieved. The results show that the optimization of the controller parameters in this paper can meet the requirements of transient conditions, and can effectively increase the stability of the control system. This research method has been successfully applied in generation II unit, and it is also useful for the generation-III unit.

Saturated Output Feedback High-Gain Control for the Water-Level of U-tube Steam Generators

Water-Level Control for the U-Tube Steam Generator of Nuclear Power Plants Based on Output Feedback Dissipation

Output Feedback Dissipation Control of Nonlinear Systems and Application to Water-Level Control for A U-Tube Steam Generator

Saturated Output Feedback Dissipation Steam Temperature Control for the Otsg of A Modular High Temperature Gas-Cooled Reactor

Gain-Scheduled Equivalent-Cascade IMC Tuning Method for Water Level Control System of Nuclear Steam Generator

Study on Optimization of PID for Feed-water Control System of RB Test in PWR Nuclear Power Station

Improving Power System Stability by Use of Water Pressure Feedback of Hydroturbine

Research on fuzzy weighted gain scheduling water level control system of U-tube steam generator

Saturated Adaptive Output-Feedback Power-Level Control for Modular High Temperature Gas-Cooled Reactors

Self-Stability Analysis And Nonlinear Power-Level Control For Pressurized Water Reactors

A Composite Nonlinear Control Scheme of the Ultra-Supercritical Boiler-Turbine Unit for Large-Scale Load Accommodation

Water level control of U-tube steam generator based on model-based active disturbance rejection control method

Model-Based Load Following Control for Helical-Coiled Supercritical Steam Generator of MHTGR

A Fuzzy Control Approach For The Coordinated-Level Control Of The Modular-Htgr-Based Nuclear Steam Supplying System

Output-Feedback Load-Following Control of Nuclear Reactors Based on A Dissipative High Gain Filter

Saturated output feedback dissipation steam temperature control for the OTSG of MHTGRs

ICONE19-44002 POWER-LEVEL CONTROL OF HIGH TEMPERATURE REACTORS BASED ON FEEDBACK DISSIPATION AND BACKSTEPPING

Nonlinear Coordinated Control for MHTGR-based Nuclear Steam Supply System.

Output Feedback Power-Level Control of Mhtgrs: Design with Hardware-In-Loop Verification

Nonlinear adaptive dynamic output-feedback power-level control of nuclear heating reactors

Nonlinear Adaptive Coordinated Control For High Temperature Gas-Cooled Nuclear Steam Supplying Systems