Abstract:Concrete block infill walls, due to their high strength and stiffness, can significantly influence the seismic behavior of the frames. The infill walls can increase the overall lateral frame strength and can also induce local failures in the surrounding frames. In general, if local failure can be avoided, the presence of the infill walls can provide additional reserved strength that can be beneficial to the frames. For this reason, a new RC frame with infill walls could be designed as a bare frame without considering the increase in strength, but measures must be taken to prevent local failures due to the infill wall-frame interaction. However, this infill wall-frame interaction is very complex, and clear design strategies to prevent local failures are not normally given in design codes. For this reason, two full-scale intermediate RC moment-resisting frame specimens with infill concrete block walls were tested under a horizontal cyclic load to study the infill wall-frame interaction. Finite element analysis was carried out to evaluate the response particularly on the infill-frame interactions. Based on the results, a design strategy to eliminate local failure in the surrounding frame is suggested. The proposed method is based on local plastic mechanism analysis of the column considering the variation in the column shear demand and column shear capacity at different states of the response as the frame deforms. The shear demand depends on the magnitude and direction of the bearing force from the infill wall. The column is considered as a captive or slender column depending on the restraint from the infill wall, thereby affecting the shear capacity of the column. The proposed approach can be readily applied without radically changing common design practices and design codes.

Effects of infill walls in frame structures under frequent earthquake: Revelation from Wenchuan earthquake

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Seismic Performance Analysis and Evaluation Method of RC Infilled Frame

Analysis of the damage mechanism of a typical RC frame in Wenchuan Earthquake

Analysis of Influence of Structural Global Seismic Capacity Induced by Infilis Subjected to Wenchuan Earthquake

An Improved Three-Strut Model for Masonry Infills in RC Frame Structures

Seismic Performance Evaluation of RC Frames with Uniform Infilled Walls Based on Adaptive CMS

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Seismic design of RC moment-resisting frames with concrete block infill walls considering local infill-frame interactions

Experimental and Finite Element Analytical Investigation of Seismic Behavior of Full-Scale Masonry Infilled RC Frames

Assessment of the effects of infill walls’ layout in plan and/or elevation on the seismic performance of 3D reinforced concrete structures

Experimental Study on the Progressive Collapse Performance of RC Frames with Infill Walls

Seismic performance of prefabricated wall panels with sliding joints for reinforced concrete frames

Study on in-plane seismic performance of solid masonry-infilled RC frames

Evaluation on the Progressive Collapse Resistance of Infilled Reinforced Concrete Frames Based on Numerical and Semi-Analytical Methods

Study on the Strengthening Effect of A Typical Rc Frame in Wenchuan Earthquake with Attached Substructures

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

SEISMIC DAMAGE FIELD OBSERVATION AND VULNERABILITY ANALYSIS OF MULTILAYER REINFORCED CONCRETE FRAME STRUCTURE

Finite Element Simulation and Analysis of Performance of Infill Walls of Aseismic Structures