Abstract:Abstract The reliability and safety of aero-engine are often the decisive factors for the safe and reliable flight of commercial aircraft. Hence, the vibration source location and fault diagnosis of aero-engine are of prime importance to detect faults and carry out fast and effective maintenance in time. However, the vibration signals collected by the sensors arranged on the casing of the aero-engine are generally the mixed signals of the main vibration sources inside the engine, and the components are extremely complicated. Therefore, the vibration source identification is a big challenge for a fault diagnosis and health management of the engine. In order to separate the key vibration sources of rotating machinery such as aero-engine, a Joint Wavelet Transform and Time Synchronous Averaging based algorithm (JWTS) is proposed in this paper. Based on the fact that the fundamental frequency and its harmonic and sub-harmonic components are generally included in the vibration spectrum of shaft fault signal of rotating machinery, wavelet transform and time synchronous averaging algorithm are combined to extract them. The algorithm completes separating the main vibration sources with three steps. First, the source number and fundamental frequency of each source are estimated using the wavelet transform. Second, every source is extracted from each observed signal by the time synchronous averaging method. Time synchronous averaging method can effectively extract a signal of cycle and harmonic rotor components and can suppress noise. Third, the optimal estimation of each source is determined according to signal’s 2-norm. Since the extracted source with a larger energy is closer to the real source, and signal’s 2-norm is a good indicator of the signal energy. Hence, the key vibration sources related to rotary speeds of the engine are obtained separately. The method is verified by synthetic mixed signals first. Three periodic signals of different frequencies are used to simulate the vibration sources of the aeroengine. The fundamental, harmonic and sub-harmonic components of them, as well as Gaussian white noise, are randomly mixed. The results show that the JWTS algorithm can estimate the number of the main sources and can extract each source effectively. Then the method is demonstrated using vibration signals of a real aero-engine. The results indicate that the proposed JWTS method has extracted and located the main sources within the aero-engine, including sources from the low-pressure rotor, high-pressure rotor, combustion chamber and accessory. Therefore, the proposed method provides a new fault diagnosis technology for rotating machinery, especially for a real aero-engine.

Aeroengine Rub-Impact Fault Diagnosis Based on Wavelet Packet Transform and the Local Discriminate Bases

Aero-Engine Fault Diagnosis Using Improved Local Discriminant Bases and Support Vector Machine

Rolling bearing fault diagnosis based on local wave method and KPCA-LSSVM

Fault Diagnosis of Aero-Engine Bearings Based on Wavelet Package Analysis

A Method of Bearing Fault Feature Extraction Based on Improved Wavelet Packet and Hilbert Analysis

Fault Diagnosis Method for the Rolling Bearing of Railway Vehicle Based on Wavelet Packet Transform and BP Neural Network

Fault Diagnosis of Demountable Disk-Drum Aero-Engine Rotor Using Customized Multiwavelet Method

Fault Diagnosis of Rolling Bearing Based on Wavelet Packet and Fourier Analysis

Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

Study on the Diagnosis of Rub-Impact Fault Based on Finite Element Method and Envelope Demodulation

Wavelet Extraction of Impact Vibration Frequency Component and Fault Analysis for a Twine Spool Aero-Engine

Application of an intelligent classification method to mechanical fault diagnosis

Early rub-impact diagnosis of rotors based on tunable Q-factor wavelet transformation

Adaptive parameterless empirical wavelet transform based time-frequency analysis method and its application to rotor rubbing fault diagnosis

Wavelet-Enhanced Time-Frequency Analysis Method for Bearing Fault Detection of Rotating Machinery

Wavelet Packet Images Matching Applied to Noise Faults Diagnosis

Fault Diagnosis Based on Wavelet Packet of Sound Signal

Fusion Fault Diagnosis Approach to Rolling Bearing with Vibrational and Acoustic Emission Signals

Combined failure identification of intermediate bearing in aeroengine based on wavelet transform, second-order difference, and 1D-LBP

Joint Wavelet Transform and Time Synchronous Averaging Source Separation Method and its Application on Aero-Engine

Detection of rub-impact fault for rotor-stator systems: A novel method based on adaptive chirp mode decomposition