Abstract:Flux-switching permanent magnet (FSPM) machines are gaining in popularity due to their robustness, wide speed range, high torque, and high power density. However, their cogging torque leads to vibration and noise due to the double-saliency structure. This paper investigates the effects of the short permanent magnet (PM) and stator flux bridge (FB) on the cogging torque reduction of three-phase 12-/10-pole FSPM machines. Four different FSPM machines, including the inner-inner topology, inner-outer topology, outer-inner topology, and outer-outer topology, are developed and analyzed with both short PM and stator FB. The configurations are obtained by placing the FB at inner/outer stator lamination and reducing the PM toward inner/outer axial directions. The cogging torque, average output torque, and PM utilization ratio of different topologies are extensively studied and compared by the finit-eelement method. Finally, prototype machines are manufactured and tested. The experimental results have validated the numerical models and the effectiveness of the developed machine in reducing the cogging torque. The results also suggest that the outer-inner topology is more effective to reduce the cogging torque, which not only reduces the utilization of the PM materials, but also mitigates the cogging torque at only slight cost of machine performance.

Stator Winding Connection-Mode Management in Line-Start Permanent Magnet Motors to Improve Their Efficiency and Power Factor

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Winding Configurations and Pole/Tooth Combinations of Doubly-Fed Flux-Switching Permanent Magnet Machines

Experiment and Analysis of High Power Line-Start Pm Motor

Automatic Change Of The Stator-Winding Connection Of Variable-Load Three-Phase Induction Motors To Improve The Efficiency And Power Factor

A High-Performance Line-Start Permanent Magnet Synchronous Motor Amended from a Small Industrial Three-Phase Induction Motor

An Improved 3-Step Startup Method Based on Sensorless Vector Control of PMSM

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Optimization of Electromagnetic Performance of Single Phase Line-Start Permanent Magnet Synchronous Motor Based on the Finite Element Method

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

The Capacitor Matching Problem in the Single-Phase Line-Start Permanent Magnetic Synchronous Motor

Comparative Study Between Doubly Salient PM Machine with New Stator/Rotor-Pole Number Combination and Biased Flux PM Machine

Design of the Line-Start Permanent Magnet Synchronous Motor Base on Induction Motor

Improvements in Permanent Magnet Synchronous Machines with Delta-Connected Winding

Comparative Study of Winding Configurations of a Five-Phase Flux-Switching PM Machine

Study of Solid Rotor Line-Start PMSM Operating Performance

A New Method of Reducing the Inrush Current and Improving the Starting Performance of a Line-Start Permanent-Magnet Synchronous Motor

Design and Prototyping of a Novel Line-Start Permanent Magnet Assisted Synchronous Reluctance Motor for Fan Application