Abstract:A fuel cell vehicle (FCV) is a sort of clean energy vehicle with zero emission. And its noise source layout spreads out its front and rear part. As a result, it is called a distributed noise source. Because the interior noise of the FCV is composed of multiple noise sources, the linearity of the interior noise of the FCV is worse than that of the conventional cars. Therefore, the sound quality of the FCV should be improved so that the customers can enjoy the clean energy and comfortable environment simultaneously. Spectral characteristics of noises measured inside the FCV at idle were analyzed. The loudness value was used to evaluate the interior noise of the FCV. Based on evaluation results, the frequency ranges for improving the sound quality of interior noise were put forward. Combined with the spectral analysis results, the parametric filtering method was used to prepare 29 sound samples to find the critical frequency which affected the human ear’s subjective sensation seriously. A virtual validation about the effect of the design parameters on the improvement of the sound quality could be achieved by using this method with advantage of time-saving and cost-dropping and without modifying the physical structure. Hence, the tendency of better solution would be found. Through converting a sound quality problem into a physical problem, a noise source identification experiment was carried out by using a single run method to quantify the noise sources which mainly contribute to the critical frequency of the interior noise spectrum. As a consequence, the main noise sources were identified from the fuel cell auxiliary system.

The Exploration of Evaluation Method about the Driving Electromotor Acoustic Comfort of the Pure Electric Vehicles

A Comprehensive Evaluation Model of Electric Bus Interior Acoustic Comfort and Its Application

A Study on Sound Quality Evaluation Method for Hybrid Electric Vehicles Focusing on Subjective Annoyance

Study on Subjective Evaluation of Vehicle’s Sound Quality

The Discomfort Model of the Micro Commercial Vehicles Interior Noise Based on the Sound Quality Analyses

Subjective evaluation test and objective quantificational description of vehicle interior noise quality

A Case Study on Improving Electric Bus Interior Sound Quality Based on Sensitivity Analysis of Psycho-Acoustics Parameters

Analysis of Noise and Vibration for a New Pure Electrical Vehicle

Sound Quality Evaluation of the Interior Noise of Pure Electric Vehicle Based on Neural Network Model

Measurement and Evaluation of Sound Quality of Interior Noise of Vehicle Cabin

Interior Noise Evaluation and Noise Source Identification of a Fuel Cell Vehicle Based on Psychoacoustic Parameters

Identification of dominant interior noise sources in micro commercial vehicle based on sound quality analyzing

The Zwicker's Psychoacoustic Annoyance Models for Noise-Induced Discomfort in the Electric Vehicle Cabin

Experimental analysis for the interior noise characteristics of the fuel cell car

High-Precision Modeling and Prediction of Acoustic Comfort for Electric Bus Based on BPNN and XGBoost

Sound Quality Evaluation of Automobile Interior Noise under Transient and Steady-State Running Conditions

Identification of Perceived Sound Discomfort Contributed from Partially Correlated Vibration and Noise Sources in Vehicles

A Novel Sound Quality Evaluation Method of the Diagnosis of Abnormal Noise in Interior Permanent-Magnet Synchronous Motors for Electric Vehicles

Sound Quality Evaluation of Noise of Hub Permanent-Magnet Synchronous Motors for Electric Vehicles

Sound Quality Investigation And Improvement Of An Electric Powertrain For Electric Vehicles

Evaluation of Human Body to Vibration Comfortableness by Surface Electromyogram Signals