Abstract:In this paper, a Ni coating was deposited on the surface of the A356 aluminum alloy by high velocity oxygen fuel spraying to improve the performance of the AZ91D magnesium/A356 aluminum bimetal prepared by a compound casting. The effects of the Ni coating as well as its thickness on microstructure and mechanical properties of the AZ91D/A356 bimetal were systematically researched for the first time. Results demonstrated that the Ni coating and its thickness had a significant effect on the interfacial phase compositions and mechanical properties of the AZ91D/A356 bimetal. The 10µm's Ni coating cannot prevent the generation of the Al-Mg intermetallic compounds (IMCs) at the interface zone of the AZ91D/A356 bimetal, while the Ni coating with the thickness of 45 µm and 190 µm can avoid the formation of the Al-Mg IMCs. When the Ni coating was 45 µm, the Ni coating disappeared and transformed into Mg-Mg2Ni eutectic structures+Ni2Mg3Al particles at the interface zone. With a thickness of 190µm's Ni coating, part of the Ni coating remained and the interface layer was composed of the Mg-Mg2Ni eutectic structures+ Ni2Mg3Al particles, Mg2Ni layer, Ni solid solution (SS) layer, Al3Ni2 layer, Al3Ni layer and sporadic Al3Ni+Al-Al3Ni eutectic structures from AZ91D side to A356 side in sequence. The interface layer consisting of the Mg-Ni and Al-Ni IMCs obtained with the Ni coating had an obvious lower hardness than the Al-Mg IMCs. The shear strength of the AZ91D/A356 bimetal with a Ni coating of 45 µm thickness enhanced 41.4% in comparison with that of the bimetal without Ni coating, and the fracture of the bimetal with 45µm's Ni coating occurred between the Mg matrix and the interface layer with a mixture of brittle fracture and ductile fracture.

Effect of Niobium Film on Corrosion Resistance of Az91d Magnesium Alloy

High Corrosion-Resistance Nanocrystalline Ni Coating on AZ91D Magnesium Alloy

Electrodeposition of Ni-Mn Films of High Corrosion Resistance at Room Temperature in Ionic Liquids

Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating

Preparation and properties of nano ZrO2 coating on magnesium alloy

Microstructure, Friction and Wear Behavior and Corrosion Resistance of electroless Double-Layer Ni-P/Ni-Mo-P Coatings on AZ91D Magnesium Alloy

Corrosion resistance of AZ91D magnesium alloy with electroless plating pretreatment and Ni–TiO2 composite coating

Effect of Zinc Immersion Pretreatment on the Electro-Deposition of Ni Onto AZ91D Magnesium Alloy

Anticorrosion behaviour and tribological properties of AZ31 magnesium alloy coated with Nb2O5/Nb2O5-Mg/Mg layer by magnetron sputtering

CORROSION ELECTROCHEMICAL BEHAVIOR OF Ni-B COATING ON MAGNESIUM ALLOY AZ91D PREPARED BY DIRECTLY ELECTROLESS PLATING

Effect of Deposition Parameters on Corrosion Resistance of the AZ31 Magnesium Alloy Coated by TiCN Film

Microstructures and corrosion resistance of conversion film-electroless Ni-W-P ternary coatings on AZ91D magnesium alloy

Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Multilayer Ni-P Coating for Improving the Corrosion Resistance of Az91d Magnesium Alloy

Surface Characterization and Corrosion Resistance of Ti–Al–Zr Alloy by Niobium Ion Implantation

A study on properties of electroless Ni-B/MgB2 coatings on AZ91 magnesium alloy

High Corrosion Resistance Multilayer Nickel Coatings on AZ91D Magnesium Alloys

Corrosion and Wear Resistance of Sputtered Carbon Film Coated Magnesium Alloy with Electroless Plating Nickel Interlayer

Microstructure And Corrosion Resistance Of Aluminized Coatings On Magnesium Alloy By Pulsed Bias Magnetron Sputtering

Effect Of Sputtering Gas Pressure On Wear Resistance And Corrosion Resistance Of Niobium Films Prepared By Magnetron Sputtering Deposition

Biocompatibility and corrosion evaluation of niobium oxide coated AZ31B alloy for biodegradable implants