Abstract:Mini vehicles with a small wheelbase are extremely sensitive to road roughness. The aim of this study is to explore the influence of road information on ride comfort and enhance the ride comfort of mini vehicles. According to the 5-degree-of-freedom vibration model of an electric mini off-road vehicle, the partial differential matrix equation of system motion is established using the Lagrange method, and the frequency response characteristic of the system is analyzed. The input matrix of pavement unevenness is obtained by considering the mutual power spectrum density between front and rear wheels. Road surface roughness information is obtained using an instrument for measuring road roughness. A comprehensive objective function and a constraint condition are established for comfort and safety. Based on the parameters obtained through the optimum design of a 1/4 vehicle model, the optimized stiffness and damping coefficient of suspension are obtained using a MATLAB optimization program. The law of the vibration performance of off-road vehicles with respect to suspension stiffness and the damping coefficient is obtained through the analysis of optimized results. A driving simulation and a test are conducted on the electric mini off-road vehicle. The results show that the use of the measured pavement data as simulation input is closer to the actual situation and provides higher accuracy compared to the simulated pavement model. According to the optimization and test results, the parameters optimized by a 1/2 vehicle (5 degrees of freedom) vibration model are better than those optimized by the 1/4 vehicle vibration model. The optimization results confirm reduction in acceleration, acceleration power spectrum density, and the root mean square of the weighted acceleration of the seat. This shows that the electric mini off-road vehicle provides better ride comfortability after optimization.

Study on method for measuring vehicle road load signals

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Research on the Modeling, Control, and Calibration Technology of a Tracked Vehicle Load Simulation Test Bench

Loading Design for Comprehensive Performance Test Bench of Drive Axle Assembly

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

A Research on the Resistance Simulation Method for Multi-axle Vehicle Driving on Complex Road

STUDY ON THE METHOD FOR MEASURING THE DRIVESHAFT TORQUE OF A MINIVAN

Research of Intensified Test on Fatigue Property of Automobile Driving Axle Based on Random Load Spectrum

Multi-lane vehicle load measurement using bending and shear strains

Improvement of vehicle axle load test method based on portable WIM

A time domain method for wheel-rail force identification of rail vehicles

Research on the Method of Whole Vehicle Load Spectrum Compilation Based on Road Surface irregularity

Fusion of Computer Vision and Piezoelectric Tactility Approach to Measuring Moving Vehicle Loads

Simulation of a Multi-Axial Loading Fatigue Test of the Rear Drive Axle of a Minivan

Vehicle weigh-in-motion technology

Novel method for load acquisition for the shock absorber upper strut mount of an automotive suspension system

Design and Verification of a Strain Gauge Based Load Sensor for Medium-Speed Dynamic Tests with a Hydraulic Test Machine

Experimental Investigation and Analysis on Dynamic Strain of Leading Trailing Shoe Drum Brake

Optimization and testing of suspension system of electric mini off-road vehicles

A bridge dynamic response analysis and load recognition method using traffic imaging

Static and dynamic vehicle load identification with lane detection from measured bridge acceleration and inclination responses