Abstract:Industrial-scale production of aromatic materials is confronted by the problem of removal of impurities such as olefins. Their removal is an essential requirement in marketability. Catalytic adsorbent clay is the most common material used for the removal of olefins from aromatic streams. The current study is focused on increasing the lifetime of a commercial type of clay by identifying the effective parameters in reducing the adsorbent lifetime. An analysis of 3 years of data from a petrochemical complex showed that water, morpholine, and <i>N</i>-formyl morpholine (NFM) contents in the feed stream are the factors reducing the clay lifetime. Various experiments have been performed to determine the individual impacts of these parameters on the clay lifetime. Reducing the water content from 150 to 70 ppm led to a 20% increase in lifetime, while increasing morpholine content from 55 to 160 ppm and NFM content from 0.55 to 91 ppm resulted in 40 and 75% reduction in lifetime, respectively. Also, six types of conventional commercial adsorbents have been tested to minimize the contents of the above-mentioned components before olefin removal by clay. Among them, silica gel showed the best performance. The optimum weight percentage of silica gel relative to the total loaded clay mass was determined to be 10%, which led to a 2.1-fold increase of clay lifetime if silica gel was loaded into the reactor prior to clay loading.

Acidic And Catalytic Properties Of Modified Clay For Removing Trace Olefin From Aromatics And Its Industrial Test

Removal of Trace Olefins from Aromatics over Metal-Halides-Modified Clay and Its Industrial Test

Study of Modified Clay and Its Industrial Testing in Aromatic Refining

Commercial test of the catalyst for removal of trace olefins from aromatics and its mechanism

Study on the Catalytic Removal of Trace Olefins in Aromatic Hydrocarbons

Commercial Side-Stream Tests of Several Mesoporous Materials Applied to Removal of Trace Olefins in Aromatics

THE ACTIVITY IN REMOVING TRACE OLEFINS OF AROMATIC HYDROCARBONS BY USING ACTIVATED CLAY SUPPORTED AlCl_3

Metal‐reinforced Sulfonic‐acid‐modified Zirconia for the Removal of Trace Olefins from Aromatics

Surface acid modification of zeolite and its application in removal of olefins in aromatics

Modification of Active Bentonite and Its Application in Olefins Removal from Aromatics

New Catalysts for Removal of Trace Olefins in the Reformates

Industrial test of a modified olefins removal catalyst in PX units of ZRCC

Removal of Trace Olefins from Aromatic Hydrocarbons by Catalyst

Removal of Trace Olefins in Aromatics by Zeolites

Effect of the Structure and Acidic Property of Activated Bentonite on Removal of Olefin in Aromatics

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Study On Removing Trace Olefins In Aromatic Hydrocarbons With Hpmo-Loaded Y Zeolites

MOLECULAR SIEVE CATALYSTS FOR REMOVING OLEFINS FROM AROMATIC HYDROCARBONS BY ALKYLATION REACTION

STUDY ON THE REMOVAL OF OLEFINS IN AROMATICS OVER Nb MODIFIED ZEOLITE Y BY ALKYLATION

AN INVESTIGATION OF THE MODIFICATION OF MESOPOROUS MATERIAL AND ITS PERFORMANCE OF REMOVING TRACE OLEFINS IN AROMATICS

Detecting and Evaluating Detrimental Factors of Clay’s Longevity, Selecting, and Optimizing an Appropriate Adsorbent for Operating Time Elevation in the Separation Process of Trace Olefins from Aromatics