Abstract:Impedance-based stability analysis method has been widely adopted for addressing the small-signal stability issues of power electronics-based systems. For the three-phase ac systems, the impedance models (IMs) are generally obtained in the rotating dq-frame and represented by the 2 × 2 transfer matrices, with which the system stability can be predicted through the Generalized Nyquist Criterion (GNC). However, the computational process of GNC as well as the derivation of the impedance matrices aggravates the complexity of stability analysis. This paper presents a simpler impedance modeling process for the three-phase symmetric systems. The IMs can be directly established by the complex transfer functions (CTFs) in the dq-frame, while keeping the equivalent relationship with the original impedance matrices. Consequently, the original multiple-input multiple-output (MIMO) system is simplified to a single-input single-output (SISO) system without losing any accuracy. Further, it is also proved that the Nyquist criterion originally used for dc systems can replace the GNC to predict stability of the cascaded three-phase symmetric system, which thus avoids the massive matrix calculations and leads to the remarkable simplification of the stability analysis. Case study of a three-phase grid-connected voltage source inverter system consisting of the frequency-domain analyses and experimental tests is presented. The obtained results confirm the correctness of the theoretical analyses.

Stability Criterion for Three-phase AC Power Systems With Converter Load

A novel stability criterion of AC power system with constant power load

Infinity-Norm of Impedance-Based Stability Criterion for Three-Phase AC Distributed Power Systems with Constant Power Loads

Stability Criteria for Constant Power Loads with Multistage $LC$ Filters

A Stability Criterion Based on the Common Denominator of System-Level Transfer Functions for the Multiple Multifunctional Converters Systems

Generalized-impedance and Stability Criterion for Grid-connected Converters

Revisiting Nyquist-Like Impedance-Based Criteria for Converter-Based AC Systems

Impedance-Sum Stability Criterion for Power Electronic Systems with Two Converters/Sources.

Impedance-Sum Stability Criterion for Cascaded Power Electronic Systems

A Generalized-Impedance Based Stability Criterion for Three-Phase Grid-Connected Voltage Source Converters

Understanding Impedance Ratio Criteria for Converter-Based AC Power System

Three-step Impedance Criterion for Small-Signal Stability Analysis in Two-Stage DC Distributed Power Systems

A novel impedance measurement method for three-phase power electronic systems

A Strictly Sufficient Stability Criterion for Grid-Connected Converters Based on Impedance Models and Gershgorin's Theorem

Complex Transfer Function-Based Stability Criterion for Grid-Connected Converters

Impedance Modeling and Stability Analysis of the Cascaded Three-phase Symmetric Systems Using Complex Transfer Functions

Large-Signal Stability Criteria in DC Power Grids With Distributed-Controlled Converters and Constant Power Loads

Stability Analysis and Location Optimization Method for Multiconverter Power Systems Based on Nodal Admittance Matrix

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

Impedance Modeling and Stability Analysis of Three-Phase Four-Leg Grid-Connected Inverter Considering Zero-Sequence

Generic Stability Impedance Criterion for the Parallel Inverters System