Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Rotor Study of Inductive Angle Sensor

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Rotor Position Detection Based on Magnetically Coupled Resonant Principle and Its Implementation

Study on the Multiperiod Bipolar Inductive Absolute Angle Sensor

An Inductive Sensor for the Angular Displacement Measurement of Large and Hollow Rotary Machinery

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

A Parallel Speed and Rotor Time Constant Identification Scheme for Indirect Field Oriented Induction Motor Drives

Study of High-Pressure Eddy Current Angle Sensor

A Compact Planar Inductive Angular Sensor with Small Latency and Low Power Consumption

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

Theoretical And Experimental Analysis On The Influence Of Rotor Non-Mechanical Errors Of The Inductive Transducer In Active Magnetic Bearings

Research on Speed Sensorless Control Strategeis for Five-phase Induction Motors With Rotor Parameter Identification

Study of Rotor Position Detection Method for Linear Synchronous Motor

An EM Induction Hi-Speed Rotation Angular Rate Sensor

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Study on the Speed Observer and the Rotor Resistance Identifier for an Induction Motor

Applicadion of Variable Reluctanced Rotor Position Sensor

A Variable Reluctance-Based Planar Dual-Coil Angle Sensor With Enhanced Linearity

Optimization of Electrostatic Sensors for Rotational Speed Measurement of a Metallic Rotor