Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Computational Model for Investigating the Influence of Unbalanced Magnetic Pull on the Radial Vibration of Large Hydro-Turbine Generators

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Unbalanced Magnetic Force Prediction in Permanent Magnet Machines with Rotor Eccentricity by Improved Superposition Method

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Unbalanced Magnetic Force In Permanent Magnet Machines Having Asymmetric Windings And Static/Rotating Eccentricities

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Rotordynamic Analysis of a Permanent Magnet Synchronous Motor Considering Nonlinear Unbalanced Magnetic Pull

Analytical Method of the Unbalanced Magnetic Pull Taking Advantages of the Open-circuit Characteristic of a Generator

Nonlinear Vibration Analysis Of An Eccentric Rotor With Unbalance Magnetic Pull

Influence of Magnetic Pole Ovality on the Unbalanced Magnetic Pull of a 1000 MW Hydro-generator Unit Installed with High Precision

Lateral Vibration Analysis of Rotor-bearing System for Hydroelectric Set

Nonlinear Vibration for Pmsm Used in Hev Considering Mechanical and Magnetic Coupling Effects

Dynamic Characteristics Analysis of Magnetic Levitation Rotor Considering Unbalanced Magnetic Pull

Simulation Model of Radial Vibration for a Large Hydro-Turbine Generator Unit and Its Application

THE UNBALANCED MAGNETIC PULL AND ITS EFFECTS ON VIBRATION IN A THREE-PHASE GENERATOR WITH ECCENTRIC ROTOR

Characteristics Analysis of Hydroelectric Generating Set under Unbalanced Magnetic Pull and Sealing Force of Runner

Dynamic characteristics of a rub-impact rotor-bearing system for hydraulic generating set under unbalanced magnetic pull

Coupled Bending-Torsional Vibration Analysis for Rotor-Bearing System with Rub-Impact of Hydraulic Generating Set under Both Dynamic and Static Eccentric Electromagnetic Excitation

Dynamic analysis for rotor system with rub-impact of a hydraulic generating set under unbalanced magnetic pull

Effect of Unbalanced Magnetic Pull of Generator Rotor on the Dynamic Characteristics of a Pump—Turbine Rotor System

Torsional and lateral vibration analysis of wind turbine generator bearing outer ring fault considering unbalanced magnetic pull