Abstract:Spatially resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of an infinitely small light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviate from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially resolved diffuse reflectance in order to improve the measurement accuracy of the technique. This research was aimed at using finite element method (FEM) to model light propagation in turbid media, subjected to normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC), and zero (ZBC)] were evaluated and compared against Monte Carlo (MC) simulations, since MC could provide accurate fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided results as accurate as those of the analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded a better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC effectively simulated spatially resolved diffuse reflectance under the illumination of a finite size beam. A large beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by the spatially resolved technique. (C) 2015 Optical Society of America

Experiment research of diffuse optical tomography imaging in homogeneous medium

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

Research on Diffuse Optical Tomography System in Frequency Domain

Optical Image Reconstruction of Non-Scattering and Low Scattering Heterogeneities in Turbid Media Based on the Diffusion Approximation Model

Visual Simulation of Diffuse Light

Investigation of Transient Signals in Nonuniform Media Based on Diffusion Approximation

Diffuse optical imaging using spatially and temporally modulated light

Tomographic imaging of absolute optical absorption coefficient in turbid media using combined photoacoustic and diffusing light measurements.

Overcoming ill-posedness of diffuse optical tomography in steady-state domain

A reconstruction method for diffuse optical tomography by grouping of source-detector configuration

Numerical modelling and image reconstruction in diffuse optical tomography

Self-Normalized Scanning Fluorescence Optical Tomography

A higher order diffusion model for three-dimensional photon migration and image reconstruction in optical tomography.

Feasibility Study of Silicon Photomultiplier Based Frequency Domain Diffuse Optical Tomography

The Time-domain Infrared Optical Tomography Based on Fluorescence Technique

Diffusive Reflectance for the Free-Space Light Propagation Theory

Optical Diffusion Tomography With Large Data Sets

The Theoretical Simulation and Experimental Research on Optical Coherence Tomography (Oct)

Image reconstruction algorithm for steady-state diffuse optical tomography with structural priori information

Instrumentation in Diffuse Optical Imaging

Development and Design of Diffusion Optical Tomography System