Abstract:k]A design and optimization approach of dynamic and control performance for a two-DOF planar manipulator was proposed. After the kinematic and dynamic analysis, several advantages of the mechanism were illustrated, which made it possible to obtain good dynamic and control performances just through mechanism optimization. Based on the idea of design for control (DFC), a novel kind of multi-objective optimization model was proposed. There were three optimization objectives: the index of inertia, the index describing the dynamic coupling effects and the global condition number. Other indexes to characterize the designing requirements such as the velocity of end-effector, the workspace size, and the first mode natural frequency were regarded as the constraints. The cross-section area and length of the linkages were chosen as the design variables. NSGA-II algorithm was introduced to solve this complex multi-objective optimization problem. Additional criteria from engineering experience were incorporated into the selecting of final parameters among the obtained Pareto solution sets. Finally, experiments were performed to validate the linear dynamic structure and control performances of the optimized mechanisms. A new expression for measuring the dynamic coupling degree with clear physical meaning was proposed. The results show that the optimized mechanism has an approximate decoupled dynamics structure, and each active joint can be regarded as a linear SISO system. The control performances of the linear and nonlinear controllers were also compared. It can be concluded that the optimized mechanism can achieve good control performance only using a linear controller.

Optimal Design of Robotic Manipulators Based on Simultaneously Considering Links and Joints Flexibility

Method for Optimizing Manipulator’s Geometrical Parameters and Selecting Reducers

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Optimal Design of Dynamic and Control Performance for Planar Manipulator

Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator

Optimal Kinematic Design of 2-DOF Parallel Manipulators with Well-Shaped Workspace Bounded by a Specified Conditioning Index

Mechatronic Design Of A Flexible Manipulator With An Improved Robust Control Uging Ga Approach

A Dynamic Optimization Approach Of Flexible Redundant Manipulators For Vibration Reducing And Torque Minimization

Optimal design for a 2-dof high dynamic manipulator based on parallelogram mechanism

Inverse Kinematic Optimal Design of 6-DOF Parallel Manipulators

Dynamic Optimization Design Method for High-speed Serial Industrial Robot

Global Optimization Design of Flexible Manipulator System

Optimal Design of A 2-Dof Pick-And-Place Parallel Robot Using Dynamic Performance Indices and Angular Constraints

Optimization Design of Robot Arm Component Assembly Positions Based on Dynamics

Manipulability Optimization for Coordinated Motion Control of Multi-arm Space Robots

Optimal Design of the Delta Robot Based on Dynamics.

Determination of the Link Lengths for a Spatial 3-DOF Parallel Manipulator

Optimal Design and Simulation on the Major Linkage Parameters of a Harvesting Manipulator

Natural Frequency Based Optimal Design of a Two-Link Flexible Manipulator

An integrated configuration optimization approach for 6-dof serial manipulators on performance indices

A Efficient Method to Optimize the Joint Torques of a Flexiblie Redundant Manipulator by Planning the Self-motion