Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Loxodromic Towing Test at Low Speed and Large Drift Angle for Deep Sea Open-Framed Remotely Operated Vehicle

Resistance Calculation and Motion Simulation for Deep Sea Open-Framed Remotely Operated Vehicle Based on Hydrodynamics Test

Numerical Analysis of a Mid-Water Trawl System with a 6-DOF Otter Board Model and Sea-Trial Verification

Design and Validation of a Shipborne Multiple-Field-of-view Lidar for Upper Ocean Remote Sensing

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Numerical Investigation on Hydrodynamic Characteristics and Drag Influence of an Open-Frame Remotely Operated Underwater Vehicle

3D Trajectory Tracking Control Platform Design for Deep Sea Open-framed Remotely Operated Vehicle Based on Hydrodynamics Test

Study on Extension of the 6-DOF Measurement Area for a Model Ship by Developing Auto-tracking Technology for Towing Carriage in Deep Ocean Engineering Tank

Numerical simulation of hydrodynamics of ocean-observation-used remotely operated vehicle

Experimental Study on the Hydrodynamic Performance of FDPSO and SRV

Hydrodynamic Coefficients of the DARPA SUBOFF AFF-8 in Rotating Arm Maneuver: Part I: Test Technology and Validation

Control System of A Novel Underwater Vehicle for Global Ocean Science to the Deepest Ocean

Virtual model testing method for deepwater floating system

Experiments on high-performance maneuvers control for a work-class 3000-m remote operated vehicle.

Experimental Study on the Low-Speed Manoeuvring Capability of a Twin-Lift Decommissioning System

Scale model test of a semi-active heave compensation system for deep-sea tethered ROVs

Horizontal Path-Following Control for Deep-Sea Work-Class ROVs Based on a Fuzzy Logic System

Structural Design and Hydrodynamic Coefficient Calculation of Observation-class ROVs

Vir(r)ual Simulation Design of Deep Sea Open-Framed Remotely Operated Vehicle Based on OpenGL

Combined depth and heading control and experiment of ROV under the influence of residual buoyancy, current disturbance, and control dead zone

Acoustics-Based Autonomous Docking for A Deep-Sea Resident ROV