Abstract:Although there are already many models for prediction of the thermal conductivity of nanoparticle suspension, most of them only consider the cases for high nanoparticle volume fractions (often > 0.1%). Considering the cost of particle itself, pumping and transportation, dispersion stability, etc., low particle concentrations are obviously more preferred. The present study firstly experimentally investigated the thermal conductivity of some oxide colloid suspensions with low particle concentrations. It was found that the famous multi-sphere Brownian model (MSBM) showed a large deviation for thermal conductivity prediction when the particle concentrations are below 0.1%. By introducing an adjustable exponential constant, n, into the volume fraction item of MSBM, the predicted thermal conductivity can be in good agreement with experimental data for the particle volume fractions ranging from 0.001 to 10%. The dependency of n on the particle volume fraction and its possible physical significance were discussed in detail. It turns out that, when the volume fraction is larger than 1%, the modified model can be reduced to the original MSBM. The value of n approximately equals to 0.7 when the volume fractions of nanofluids are lower than 0.005%. Between these two volume fractions, n is found to follow a nearly linear relation with the logarithm of volume fraction. The validity of the modified MSBM model for practical supplication was further justified based on numerical method. The simulation results showed that our model has excellent agreement with Maxwell–Garnetts model in low volume fraction ranges due to the weak interaction between various nanoparticles in the system. Our study should be of value for numerical simulation and engineering design of nanofluids in the future.

A Thermal Conductivity Model for Low Concentrated Nanofluids Containing Surfactants under Various Dispersion Types

Role of Interfacial Surfactant Layers in the Thermal Conductivity of Nanofluids

Experimental Investigation and Modelling on the Thermal Conductivity of CNTs Based Nanofluids

A Novel Equivalent Agglomeration Model for Heat Conduction Enhancement in Nanofluids

Roles of Surfactants and Particle Shape in the Enhanced Thermal Conductivity of TiO2 Nanofluids

Model for Effective Thermal Conductivity of Suspensions Containing Spherical Nanoparticle Inclusions

A New Thermal Conductivity Model for Nanorod-Based Nanofluids

The Effective Thermal Conductivity of Nanofluids Based on the Nanolayer and the Aggregation of Nanoparticles

Effective Thermal Conductivity of Nanofluids Considering Interfacial Nano-Shells

Modified Prediction Model for Thermal Conductivity of Spherical Nanoparticle Suspensions (nanofluids) by Introducing Static and Dynamic Mechanisms

A Comprehensive Model for the Enhanced Thermal Conductivity of Nanofluids

A Prediction Model for the Effective Thermal Conductivity of Nanofluids Considering Agglomeration and the Radial Distribution Function of Nanoparticles

A Fractal Model for Predicting the Effective Thermal Conductivity of Liquid with Suspension of Nanoparticles

Experimental Investigation and Prediction of the Thermal Conductivity of Water-Based Oxide Nanofluids with Low Volume Fractions

Nanofluids for Thermal Transport

An improved model for thermal conductivity of nanofluids with effects of particle size and Brownian motion

Effective Thermal Conductivity of Nanofluids: Measurement and Prediction

Thermal Conductivity of Interfacial Layers in Nanofluids

A New Model for Heat Conduction of Nanofluids Based on Fractal Distributions of Nanoparticles

A Novel Method to Measure Thermal Conductivity of Nanofluids

A Comprehensive Model for Effective Density of Nanofluids Based on Particle Clustering and Interfacial Layer Formation