Abstract:A novel numerical analysis method based on the charge simulation method (CSM) is proposed. The distribution characteristics of three‐dimensional electric fields in the near‐field area were analysed. The electric field surrounding the antenna exhibited axial symmetry. The highest electric field strength was at the top of the antenna, and as the distance from the antenna increased, the electric field strength exponentially decreased. The comparisons are performed between the results of the CSM and those of commercial software, the average relative errors of CSM on two observation paths are very small, 2.20% and 2.21%, respectively. Additionally, the CSM shows considerable advantages in saving calculation resources and improving efficiency. To further verify the effectiveness of the proposed method, the comparison between CSM calculation and the measured data is carried out. The results show that this method can accurately calculate the electric field near VLF transmitting antenna and offer valuable insights and a new solution. Very‐low‐frequency (VLF) transmitting antennas have a crucial influence on the nearby electromagnetic environment. Commercial software packages, such as CST Studio Suite (CST) or Altair FEKO (FEKO), are always utilised to calculate the electric fields of VLF antennas, which consume considerable computing resources and time. The classical method of electric field calculation, the charge simulation method (CSM), is first applied to the calculation of electric field near the VLF transmitting antenna. The distribution characteristics of three‐dimensional electric fields were analysed. The electric field surrounding the antenna exhibited axial symmetry. The highest electric field strength was at the top of the antenna, and as the distance from the antenna increased, the electric field strength exponentially decreased. The comparisons are performed between the results of the CSM and those of commercial software, the average relative errors of CSM on two observation paths are very small, 2.20% and 2.21%, respectively. Meanwhile, the CSM shows considerable advantages in saving calculation resources and improving efficiency. Additionally, the comparison between CSM calculation and the measured data is carried out. The results show that this method can accurately calculate the electric field near VLF transmitting antenna and offer valuable insights and a new solution.

Study on the Near Field Characteristic of Antenna in Package

Characterization Of Near-Field Coupling Effects From Complicated Three-Dimensional Structures In Rectangular Cavities Using Fast Integral Equation Method

Characterization of shielding effectiveness of metallic frustum cone-like cabin with one coaxial feeding monopole antenna illuminated by a HEMP

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

Enhancing Farfield Isolation Between Nearby Base Station Array Antennas by a Resistive Film Wall

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

Accurate and efficient planar near-field measurements: a new perspective from electromagnetic information theory.

Shielding Effectiveness Characterization of Metallic Rectangular Cascaded Enclosures

Patch Antenna Radiation Pattern Evaluation Based on Phaseless and Single-Plane Near-Field Scanning

Rigorous characterization of EMC antennas

Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package

Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

Novel numerical analysis of electric fields in the near field of very‐low‐frequency antennas based on the charge simulation method

Near-Field Radiation Estimation and Its Reduction Using a Novel EBG for PCB

Near-field Scanning and Its EMC Applications

Review of Near-Field EMI Measurement

Research Methods of Antennas′Near Field Properties and Their Applications

An Efficient Method for Power Integrity and Emi Analysis of Advanced Packages

Equivalent Radiation Source of 3D Package for Electromagnetic Characteristics Analysis

An Efficient Hybrid Technique for Analysis of the Electromagnetic Field Distribution Inside A Closed Environment

Preliminary Study on the Near-Field Absorber