Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Force Transmission Mechanism of a New Joint of Concrete-Filled Rectangular Steel Tubular Column under Axial Compression

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Bearing Strength of Concrete-Filled Steel Tube Reinforced with Internal Transverse Stiffened Bars under Axial Compression

Research on Behavior of the Joint with Concrete-filled Steel Tubular Column Under Pre-load in Steel Tube

Experimental and Theoretical Investigation of Concrete-Filled Steel Tubular X-Column under Axial Compression

On the Axial-Load Bearing Capacity of Short Steel Tube Column Reinforced with Structural Steel and Concrete

Performance test and Finite-element analysis of high strength concrete-filled steel tubular columns under axial compression

Experimental Study and Theoretical Analyses on Compressive Bearing Capacity of High Strength Concrete-Filled Steel Tube Composite Columns

Experiment study of reinforced concrete filled steel tubular columns subjected to axial compression

New Connection System for Confined Concrete Columns and Beams. I: Experimental Study

Experimental Research on New Type of Concrete-filled Steel Tubular Column Joint to RC Beam

Axial compression behavior of reinforced concrete beam to square thin‐walled concrete‐filled steel tube column joints stiffened by internal diaphragms

Experimental study on axial compressive strength of concrete filled composite steel tube short columns

Study on axial-compression bearing capacity of steel tube filled with steel-reinforced concret

Compressive behavior of joint core confined with core steel tube for connection of polyvinyl chloride-carbon fiber reinforced polymer–confined concrete column and reinforced concrete beam

Performance of Circular Concrete-Filled FRP-Grooved Steel Composite Tube Columns under Axial Compression

Experimental and Numerical Study of the Behavior of Concrete-Filled High-Strength Steel Tube Columns with Large D/t Ratio under Axial Compression

Research on square stub columns with oblique ribs of concrete-filled thin-walled steel tube under axial compression loading

Analytical Behavior of Concrete-filled Steel Tubular Stub Column with Interal Steel Reinforced under Axial Compression

Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints