Abstract:Aluminum reflector, especially OAP (Off-Axis Parabolic) reflector, has been widely used in terahertz and infrared systems for its low cost, lightweight, good machinability, small size, simple structure, and having the same thermal expansion and contraction with the system structure which makes it have a wide temperature adaptability. Thorlabs, Daheng and other large optical components companies even have Aluminum OAP sold on shelf. Most of the precision Aluminum OAP is fabricated by SPDT (single point diamond turing). Affected by intermittent shock, the roughness of aluminum OAP mirrors through conventional single-point diamond lathes is around 7 nm which limits the scope of application for aluminum mirrors, like in the high power density terahertz/infrared systems and visible/UV optical systems. In this paper, a continuous process frock is proposed, which effectively reduces the influence of turning impact on the mirror roughness. Using this process, an off-axis parabolic aluminum reflector with an effective diameter of 50 mm, off-axis angle of 90 degree is fabricated, and the performances are validated. Measurement by VEECO NT1100 optical profiler with 20× objects, the surface roughness achieves 2.3 nm, and the surface figure error is within λ/7 RMS (λ= 632.8 nm) tested by FISB Aμ Phase laser interferometer with the help of a standard flat mirror. All these technical specifications are close to the traditional glass-based reflectors, and make it possible for using Aluminum reflectors in the higher LIDT (laser induced damage threshold) systems and even for the micro sensor of ionospheric for vacuum ultraviolet micro nano satellites.

THz reflection properties measurement of several kinds of optical brackets

Small angle measurement method based on the total internal multi-reflection

Analysis of Reflection Property of Cube-corner Retroreflector with Vector Expression

Photonic THz Frequency Domain Spectroscopy System with Attenuated Total Reflection

Group Delay Dispersion Measurement of a Dispersive Mirror by Spectral Interferometry: Comparison of Different Signal Processing Algorithms.

The Distortion in Fixing the Swing Mirror Bracket of the Space Solar Telescope

Objective Backscattering Properties Measurements at 2.52 Terahertz

A 2.52 THz Electrically Controlled Object Reflectivity Measurement Plan

High-precision Interference Measurements of Phase Shift Between Orthogonal Linear Polarized Beams at Total Internal Reflection

Measured reflection and transmission properties of building materials for indoor THz communication

High-Resolution Infrared Reflectance Distribution Measurement Under Variable Temperature Conditions

A Novel Method of Terahertz Spectroscopy and Imaging in Reflection Geometry.

Measurement of 2.52 THz Back Scattering in Different Roughness Paraboloid

The improvement of surface roughness for OAP aluminum mirrors: from terahertz to ultraviolet

Measurement of 2.52 THz Back Scattering in Aluminium Plates with Four Kinds of Roughness

Measurement of Bidirectional Reflection Distribution Function on Material Surface

Research on THz Laser Transmittance of Rotated F-P Plate

Reflection Characteristics Measurements of Indoor Wireless Link in D-Band

Bidirectional Reflectance Distribution Function (BRDF) Measurements, Modeling and Applications in Space-Agile Tx/Rx Common Aperture System

Terahertz detecting method using multi-reflection optical lever

Reflectance measurements of mm-wave absorbers using frequency-domain continuous wave THz spectroscopy