Abstract:Abstract Based on the dual equation of Hamilton system and Duhamel's integral, and the orthogonality of the deflection equations, the mechanical model of homogeneous rectangular thin plate rock mass was established. And the results showed that the effective vibration modes of thin plate granite with four sides fixed were the 1 st , 5 th and 6 th orders under uniform dynamic load, and their vibration frequencies were 310rad/s, 975rad/s and 1309rad/s respectively. Under sustained dynamic load, moreover, the change of the vibration state of the 1 st mode was the most sharp, and the positive and negative alternation of its amplitude was the most frequent in the whole period, which had the most obvious effect on the vibration of the thin plate rock mass. Based on the Fourier transform formula, the Fourier series expressions and waveforms of sustained dynamic loads which contained rectangular wave, triangular wave and impact wave were obtained. The vibration characteristics of thin plate rock mass under these three kinds of sustained dynamic loads, the dynamic distribution of deflection, stress and maximum shear stress, as well as the dynamic damage and failure modes were all obtained. The results showed that plate cracks occurred firstly in the middle of the four sides and these cracks would propagate rapidly along the boundary of the thin plate rock mass; and then, plate cracks occurred at the central of the thin plate and the main develop tendency of these cracks was outward along the long central axis, moreover, these cracks also tended to expand outward along the short side central axis. It could be concluded that the initial failure position of the thin plate rock mass could be determined by the 1 st effective mode, and the development direction and trend of the damage could be determined by 5 th and 6 th effective vibration modes; under sustained dynamic load, tensile-shear failure occurred at four sides and shear failure at four corners; The tensile failure occurred in the central area of the thin plate, which developed into a main crack along the central long axis and a secondary crack along the short central axis, forming an " O- 十 " fracture pattern.

Study on the failure mechanism of single-layer cylindrical shell under seismic motion based on refined constitutive model

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

Improvement of hysteretic constitutive model for reinforcements considering buckling

Study on Dynamical Failure Index of Single Layer Spherical Latticed Shell Structures

STUDY ON TYPES AND CHARACTERS OF DYNAMICAL FAILURE FOR SINGLE LAYER LATTICED SHELLS

Double-control Criterion of Dynamical Strength Failure for Single Layer Latticed Shells

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Energy-Based Analysis of Anti-Seismic Performance of Latticed Shell in Coordination

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Seismic damage behaviors of structural steels under different constitutive and damage models

SEISMIC DAMAGE ASSESSMENT OF HIGH-RISE RC STRUCTURES BASED ON MATERIAL DAMAGE MODEL

Seismic behavior analysis of cable-stiffened cylindrical latticed shells

Dynamic Response and Failure Mechanism of Layered Thin Plate Rock Mass Under Sustained Dynamic Load

Static Stability Behavior-Based Seismic Damage Endurance Assessment of Long-Span Single-Layer Spherical Lattice Shells

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Collapse of the spatial double-layer cylinder shell by experimental study

Experimental Study of Structural Steel Constitutive Relationship under Cyclic Loading

Investigation on behaviors of double-layer spherical reticulated shells under seismic precautionary intensity

Numerical and Theoretical Study on Failure Characteristics and Damage Assessment Model of Curved Steel-Concrete-Steel Sandwich Shells Subjected to Impact Load

Experimental Study on Seismic Behavior of Concrete Filled Square Steel Tubular Columns to Low-Cycle Reversed Horizontal Load