Abstract:The short glass fiber (GF) reinforced polypropylene (PP) composites were prepared by melt process. The influences of contents and types of compatibilizers on the interface adhesion and mechanical properties were investigated by MFR,HDT,DSC, SEM and mechanical test. The high performance material was prepared successfully. The results indicate that the maleic anhydride grafted polyolefin elastomer (POE-g-MAH),as well as the maleic anhydride grafted PP (PP-g-MAH),can enhance the MFR of the composite to improve the flow properties. The HDT of the composite added 1 phr POE-g-MAH shows 5℃ higher than PP/GF,the HDT of the composite added 1 phr PP-g-MAH shows 14℃ higher than PP/GF. The HDT of the composite added 2 phr POE-g-MAH is much higher than the composite added 2 phr PP-g-MAH. The degree of crystallinity of PP can be enhanced by introduced GF,and moderate amounts of compatibilizer (1 phr or 2 phr) can enhance the crystallization temperature of PP due to the hetero-geneous nucleation effect. The interfacial adhesion between GF and PP can be obviously improved by introducing compatibilizer, which has been evidenced by SEM. The composites added 2 phr POE-g-MAH or PP-g-MAH show the best tensile strength,flex-ural strength and flexural modules of elasticity,which are higher 25.1% and 25.9%,38.0% and 40.2% and 13.9% and 19.2% than PP/GF respectively. At the room temperature (23℃) or low temperature (–20℃),the impact strengths of the composites added 2 phr POE-g-MAH or PP-g-MAH are higher 76.6% and 55.0%,or 42.2% and 30.6% respectively. Both POE-g-MAH or PP-g-MAH show excellent mechanical properties. Compared with the composite added 2 phr PP-g-MAH,the composite added 2 phr POE-g-MAH shows similar tensile and flexural properties,and exhibits better prominent impact performance.

Influence of Fiber Length and Compatibilizer on Mechanical Properties of Long Glass Fiber Reinforced Polyamide 6,6

The Influence of Compatilizer on Mechanical Properties and Rheological Behavior of Long Glass Fiber Reinforced Nylon 66

Study on the Mechanical Properties of the Long Glass Fiber Reinforced PA66

Effects of Compatibilizers on Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene

Effects of PA6,6/PP Ratio on the Mechanical Properties of Short Glass Fiber Reinforced and Rubber-Toughened Polyamide 6,6/polypropylene Blends

MECHANICAL PROPERTIES OF SHORT GLASS FIBER AND SILICON DIOXIDE POWDER REINFORCED PA66/UHMWPE COMPOSITES

Mechanical Properties and Morphology of Polypropylene/Polypropylene-g-Maleic Anhydride/Long Glass Fiber Composites

Effect of Injection Molding Parameters on Mechanical Properties of Long Glass Fiber Reinforced PA66 Composite

Effects of Compatibilizers on Properties of Short GF Reinforced PP

Influence Of Different Compatibilizers On The Morphology And Properties Of Pa6/Pet/Glass Fiber Composites

Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene Composites and Their Influence Factors

Effect of PPO‐g‐MA on Structures and Properties of PPO/PA6/short Glass Fiber Composites

Rheological and Mechanical Properties of Pc/Hdpe/Glass Fiber Composites

MECHANICAL AND TRIBOLOGICAL PROTERTIES OF GLASS FIBER REINFORCED POLYAMIDE 6 COMPOSITES

Influences of matrix resin on mechanical properties of LGF-PP

Effect of Screw Configuration and Screw Speed on the Mechanical and Rheology Properties of Glass Fiber Reinforced Polyamide 66

Influences Of Tensile Rates And Filler Content On Mechanical Properties For Pp-Gb Composites

Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF

Annealing Effect on Crystalline Structure and Mechanical Properties in Long Glass Fiber Reinforced Polyamide 66

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

Toughness of long glass fiber reinforced polypropylene composites