Abstract:The coagulation performance of AlCl3 and polyaluminum chloride (PAC) during treatment of water from the Yellow River was investigated with different initial pH conditions and coagulant doses. Speciation of the residual aluminum was also studied. PAC showed superior coagulation performance to AlCl3, and it altered the initial pH slightly under alkaline conditions. For Yellow River water treatment with PAC and AlCl3, the optimum initial pH was 6.0 and the optimum coagulant dose was 15 mg/L (Al). Under these conditions, the removal of turbidity, UV254 and dissolved organic carbon was optimized. The organic material in the effluent after coagulation was mostly hydrophobic, and this material was removed better with higher coagulant doses and in neutral or weakly alkaline conditions. It was not easy for the Al from PAC to transfer to and remain in the effluent, and PAC’s residual aluminum ratio was lower than that of AlCl3. With a coagulant dose of 11–15 mg/L and initial pH of 8.0, there was little Al remaining in the water after treatment with either AlCl3 or PAC. The residual Al was mainly present as dissolved Al, and dissolved organically bound Al was the predominant species. Dissolved inorganically bound monomeric Al was the main component in dissolved monomeric Al. The residual Al concentration was effectively controlled using a coagulant dose of 10–15 mg/L and initial pH of 7.0–8.5. PAC treatment produced lower concentrations for several residual Al species, except for dissolved organically bound Al, than AlCl3 treatment. PAC could effectively reduce the concentration of dissolved Al and dissolved monomeric Al in water after treatment.

The effect of additional poly-diallyl dimethyl ammonium-chloride on the speciation distribution of residual aluminum (Al) in a low DOC and high alkalinity reservoir water treatment

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Effect of OH−/Al3+ Ratio on the Coagulation Behavior and Residual Aluminum Speciation of Polyaluminum Chloride (PAC) in Surface Water Treatment

Relationship Between Residual Al Species, Floc Operational Parameters and Coagulation Performance During Reservoir Water Treatment by PAC–PDMDAAC

Aluminum fractions in surface water from reservoirs by coagulation treatment with polyaluminum chloride (PAC): Influence of initial pH and OH−/Al3+ ratio

[Relationship among Coagulation Effect of Al-based Coagulant, Content and Speciation of Residual Aluminum].

Effect of pH on the coagulation performance of Al-based coagulants and residual aluminum speciation during the treatment of humic acid–kaolin synthetic water

Coagulation Performance and Residual Aluminum Speciation of Al2(SO4)3 and Polyaluminum Chloride (PAC) in Yellow River Water Treatment

Enhanced Coagulation for Treating the Micropolluted Water: Effects of Dosages and Ph on Coagulation Performance and Residual Al

Effect of Aluminum Speciation and Structure Characterization on Preferential Removal of Disinfection Byproduct Precursors by Aluminum Hydroxide Coagulation.

Enhanced Coagulation with Polyaluminum Chlorides: Role of Ph/alkalinity and Speciation.

Coagulation Efficiency and Residual Aluminum Content of Polyaluminum Silicate Chloride in Water Treatment

Coagulation Performance, and Speciation and Concentration of Residual Aluminum in Yellow River Water Treatment with AlCl3 and Polyaluminum Chloride (PAC)

Effect of Fresh Aluminum Hydroxide Gels on Algae Removal from Micro-Polluted Water by Polyaluminum Chloride Coagulant

Effects of Al Species on Coagulation Efficiency, Residual Al and Floc Properties in Surface Water Treatment

The Removal Efficiency and Reaction Mechanism of Aluminum Coagulant on Organic Functional Groups-Carboxyl and Hydroxyl

Effect of Aluminum Hydrolysis-Polymerization Species on Coagulation of Low Temperature and Low Turbidity Water

Influence of Coagulation Mechanisms on the Residual Aluminum – the Roles of Coagulant Species and MW of Organic Matter

Relative Importance of Hydrolyzed Al(III) Species (ala, Alb, and Alc) During Coagulation with Polyaluminum Chloride: A Case Study with the Typical Micro-Polluted Source Waters

The Chemical Species Distribution of Aluminum in Composite Flocculants Prepared from Polyaluminum Chloride (pac) and Polydimethyl-Diallylammonium Chloride (Pdmdaac)

Study on the Effects of Organic Matter Characteristics on the Residual Aluminum and Flocs in Coagulation Processes.