Abstract:This paper presents a novel design method for multifunctional filtering diplexers integrated with single-pole double-throw switches having three operating modes: Modes 1–3. Modes 1 and 2 involve the operation of switchable filters with different frequencies, which are suitable for time-division duplexing (TDD) systems. Mode 3 involves the operation of switchable diplexers, which are suitable for TDD and frequency-division duplexing (FDD) systems. The proposed design method is based on distributed coupling technology and can thus offer a high degree of design flexibility, particularly in terms of controlling the filter order, bandwidth, and number of channels. To demonstrate the feasibility and design flexibility of the proposed method, it was used to design and fabricate second- and fourth-order multifunctional diplexers; the designed diplexers were then assessed through electromagnetic simulations and experimental measurements. The simulation results were in good agreement with the experimental results, thereby validating the feasibility and design flexibility of the proposed method. The results indicated that the second- and fourth-order multifunctional diplexers occupied small circuit areas (approximately and , respectively). In addition to their multifunctional characteristics and high design flexibility, the multifunctional diplexers exhibited satisfactory performance, including an in-band insertion loss of 42 dB in the OFF state, and a port-to-port isolation of >48 dB.

Synthesis of Microwave Resonator Diplexers Using Linear Frequency Transformation and Optimization

Synthesis and Design of Microwave Diplexers with a Common Resonator Junction

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of Dual-Mode Loop Resonator-Based Microwave Diplexers with Enhanced Performance

Design of A Compact Diplexer Using Microstrip and Slotline Dual-Mode Resonators

Compact Dual-Mode Loop Resonators for Microwave Triplexer Applications

Accurate Design of High-Performance Diplexers for Mobile Communication Base Stations Applications

Design of Microstrip Multifunction Integrated Diplexers With Frequency Division, Frequency Selection, and Power Division Functions

Optimization Technology of the Microwave Diplexer Based on Spatial Mapping Algorithm

Microwave Linear-phase Microstrip Filters Using Ring Resonators

A Novel Design Method for High Isolated Microstrip Diplexers Without Extra Matching Circuit.

Flexible Design Method for Multifunctional Filtering Diplexers Integrated With Single-Pole Double-Throw Switches

A Microstrip Lossy Diplexer with Flat Channel Passbands

Compact Dual-Band Bandpass Filter and Diplexer Using Hybrid Resonant Structure with Independently Controllable Dual Passbands

Design of High-Performance Microstrip Diplexers with Stub-Loaded Parallel-Coupled Lines

Compact Microstrip Bandpass Diplexer Based on Twist Revised Split Ring Resonators

Compact and Highly-Selective Microstrip Bandpass Filter and Diplexer Using Two-Stage Twist Modified Split-Ring Resonators

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Compact Microstrip Diplexer Based on a Novel Coupling Topology

Miniaturized Single-Ended and Balanced Dual-Band Diplexers Using Dielectric Resonators

A Novel Microstrip Diplexer Based on Coupled Line